All categories
Featured selections
Trade Assurance
Buyer Central
Help Center
Get the app
Become a supplier
(416 products available)
Ready to Ship
Ready to ShipMp1482ds is available in various types. Each type is different and has advantages and usability in multiple areas.
The types are:
Type MP1482DS A9N
This model is a 3A buck. It supports a wide range input voltage in a synchronous configuration. It also supports an MP1482DS for a full step 1/32 microstepping driver motor.
Type MP1482DS A9P
It is another stepper driver that integrates logic, interface transistors, PWM, and 32 microsteps.
Type MP1482DS A19N 955
It is a micro stepping driver that uses MP1482DS as a core. It features ultra-quiet operations on 1/32 microsteps.
Type MP1482DS A22P
It is a full 1/32 micro stepping driver with a high level of current sense feedback. It is convenient for overheating protection and very accurate driver voltage.
The Mp1482ds integrated circuit is a stepper motor driver that performs a precise non-linear control of the input signal.
This enables the output signal to maintain the desired value regardless of load perturbations and influences. Some of its vital functions include:
Speed Control Function
MP1482DS can control the motor speed by adjusting the duty cycle of the PWM signal. The effective voltage level applied to the motor winding will control this.
Torque Control Function
MP1482DS contributes significantly to torque production by regulating current flowing through motor windings. This is done by the system holding position torque and the required output torque.
Angle Control Function
For stepper motors, angle position control is accomplished by sending the right number of pulses. Each pulse represents a step, and the MP1482DS generates the correct pulses to achieve the desired angle.
Direction Control Function
It is accomplished by changing the sequence in which motor winding is energized. This is done by controlling the logical states of the MP1482DS motor winding output.
Micro stepping Control Function
The MP1482DS supports micro stepping, allowing for smoother motor motion and higher position control precision. It achieves this by toggling different PWM signals for each motor winding gradient.
The Mp1482ds stepper motor controller is preferred in many areas where precision control of motor is required. Some of these areas are:
Robotics
Mp1482ds is used in robotic systems to control the movement of limbs, joints, and actuators. This allows for precise motion and positioning, which is required for robotic tasks.
3D Printers
These printers commonly use stepper motors to control the movement of the print head and the build platform. The MP1482DS enables accurate layering and printing of detailed models.
CNC Machines
Computer numerical control machines rely on stepper motors for precise cutting, milling, and engraving operations. Mp1482ds ensures accurate control over motor positioning and movement
Automated Systems
In automation systems, MP1482DS is used to control the motors driving conveyor belts, robotic arms, and other mechanical components for material handling and assembly tasks.
Medical Equipment
Medical devices like pumps and diagnostic machinery require precise motor control for proper functioning. So, the Mp1482ds provides the needed accuracy and reliability.
Aerospace and Aviation
There is a need for precise control of flight instruments, radar systems, and other critical applications in this field. Thus, the MP1482DS has become the go-to option.
Satellite Systems
These systems depend on stepper motors for position control of antennas, solar panels, and other components. This ensures optimal performance in space.
Mp1482ds design features are key determining factors of the device's functionality, performance, and applications. Knowing these features will also help understand how it is better than its counterparts.
Multiple Microstepping
The MP1482DS can achieve up to 1/32 microstepping. It provides smoother motor movements and enhances position control accuracy. This feature decreased vibrations at low speeds
Wide Voltage Range
The device can operate between a voltage range of 8V to 38V. This allows flexibility in a broader range of power supply designs and motor applications.
Internal Protection Features
The MP1482DS integrates several protective features such as overcurrent and thermal shutdown protection. This safeguards both the device and the motor from damage during fault conditions.
High Efficiency and Low Power
Its synchronous rectification helps reduce power dissipation significantly. This aids in increasing the overall system efficiency and reducing heat generation.
Control Simplicity
MP1482DS is designed with simplicity in mind. It requires a standard PWM signal for control. This makes it easy to interface with microcontrollers and other control systems.
Flexible Outputs
The device can independently control multiple motor windings. This offers flexibility in different motor configurations and operational modes.
The main difference is that they can achieve up to 1/32 micro stepping. It provides smoother operation and higher precision compared to others.
The answer is no. Therefore, it is specifically designed for bipolar stepper motors. These are because of the two coil configurations required by the device.
The device can handle up to 3A per phase. This makes it suitable for medium-power applications requiring more motor torque.
Scenarios requiring frequent use of the device in high-load conditions would benefit from a cooling system. This is because the device's internal thermal protection will be activated under high loads.
Yes, it has a built-in feature that allows it to provide feedback about any fault condition. This makes it easier to monitor and protect the system.
