(5 products available)
A Vector 700A jump starter is also known as a portable battery jump starter or a jump starter pack. It is a small, rechargeable battery-powered device that is used to jump-start vehicles with dead batteries. A vehicle jump starter usually contains a built-in battery that can be charged from a wall outlet or from the vehicle's power outlet. It has clamps that can be attached to the vehicle's battery so that it can supply the battery power when needed. The Vector 700A jump starter is made to start up vehicles with 12V batteries. There are different types of the Vector 700A jump starter, which include the following:
The Vector 700A portable jump starter specifications are as follows:
Power
Peak Amp: 700 amps
Instant Starting Current: 350 amps
Battery
Battery Technology: Lithium-ion battery
Battery Capacity: 12,000 mAh
Input and Output
Input Voltage: 110 volts AC
Output Voltage: 12 volts DC
USB Ports: 2, 5 volts
Features
Smart Charging: Yes
Digital Display: Yes
Built-in Safety Features: Yes
LED Flashlight: Yes
Dimensions and Weight
Dimensions: 13.78 x 5.51 x 4.72 inches
Weight: 5.6 lbs
Here is how to maintain the Vector 700A jump starter:
Regular Charging
Keep the Vector 700A fully charged. Charge it every three months if it's not used and follow the manufacturer's instructions.
Clean Connections
Wipe the jumper cable ends and the battery terminals clean. This avoids rust and ensures good contact when boosting.
Inspect Cables
Look for any cracks or damage on the jumper cables. Replace them if torn, frayed, or damaged to maintain safety.
Temperature Control
Avoid exposing the jump starter to extreme heat or cold. This helps maintain optimal battery performance and lifespan.
Safe Storage
Store the Vector 700A in a dry, clean location away from liquids, dust, and flammable materials. This protects the device from damage.
Choosing any jump starter for retail or wholesale purposes requires careful consideration of a few important factors. Here are some of them:
Ease of Use
When selecting a jump starter, consider its ease of use. Options with easy-to-read displays and simple controls should be sought. Also, choose models with clear instructions and color-coded cables that are easy to operate in emergencies.
Safety Features
Safety should be a top priority when selecting a jump starter. Look for devices with built-in safety features such as short-circuit prevention, overload protection, and spark-proof technology. Additionally, choose models with safety warnings or instructions to guide users during usage.
Portability
Consider the jump starter's portability. Compact and lightweight versions are easy to store and carry in vehicles, making them convenient for emergency situations. Additionally, features like integrated storage for cables and accessories can enhance portability and organization.
Durability
When choosing a jump starter, consider its durability. Seek robust models made from long-lasting materials that can withstand regular use and potential rough handling. Additionally, consider features such as water or dust resistance, which can enhance the jump starter's durability in various environments.
Time-saving
Another important factor to consider when choosing any jump starter is time-saving. Choose models that allow quick and efficient jump-starting of vehicles. Features like quick charge technology or multiple simultaneous connections can save time and ensure a seamless experience.
Versatility
Consider the versatility of a jump starter. Seek models with additional features and functions, such as built-in flashlights, USB ports for device charging, or AC outlets. These extra benefits can be useful in emergencies and make the jump starter more versatile for various applications.
Replacing a vector 700A jump starter is not as difficult as it sounds. The good news is that, with the right tools and basic knowledge of automotive electrical systems, replacing a Vector 700A jump starter can be a DIY-friendly task. Here are some steps on how to DIY and replace a vector 700A jump starter:
First, ensure that the vehicle is turned off and the keys are removed from the ignition. To begin with, use a 10mm socket or wrench to remove the negative (black) battery cable from the batteries and set it aside. This will prevent any electrical shorts or accidents. Next, remove the positive (red) battery cable from the batteries using the same 10mm socket or wrench. These cables are typically held in place with bolts and can be easily removed by loosening the bolts.
After that, disconnect the two 8mm nuts holding the two fat wires going to the starter motor. It is important to note that these wires are usually connected directly to the starter and may be located near the front of the vehicle, close to the radiator. Once the two fat wires have been disconnected from the starter, move to the top of the old starter and remove the two 13mm bolts that hold the old starter in place. This will allow for the removal of the old starter.
Once the old starter is removed, it is time to install the new starter. Position the new starter in place and secure it by tightening the two 13mm bolts. After that, reconnect the two fat wires to the starter motor, ensuring to use the same 8mm nuts that were removed earlier. Then, reconnect the positive (red) battery cable, using the 10mm socket or wrench to tighten the bolt securely. Finally, reconnect the negative (black) battery cable, ensuring it makes a good connection to the batteries.
At this stage, the replacement of the Vector 700A jump starter is successful. To ensure that the new starter is working properly, perform a quick test to make sure that the vehicle starts up smoothly. If it does, great!
Q1: How long does a Vector 700A jump starter last?
A1: The longevity of a Vector 700A jump starter can be influenced by several things, such as how often it's used, how well it's maintained, and its construction. Typically, these jump starters can last for 2-5 years. However, with proper care and maintenance, it can last longer. For example, always keep it charged, keep it clean, and protect it from extreme temperatures.
Q2: How to maintain a Vector 700A jump starter?
A2: Maintaining a Vector 700A jump starter is crucial to extending its lifespan and ensuring optimal performance. Here are some tips: 1. Follow the manufacturer's instructions for charging and using the jump starter. 2. Regularly charge the jump starter, even if it's not used. 3. Keep the jump starter clean and dry. 4. Protect the jump starter from extreme temperatures.
Q3: Can the Vector 700A jump starter be used on different vehicles?
A3: Yes! The Vector 700A jump starter can be used on different vehicles. However, the vehicle's battery should not exceed the jump starter's maximum rating. The jump starter is compatible with most cars, trucks, SUVs, and motorcycles.
Q4: Does the Vector 700A jump starter have a warranty?
A4: Many Vector 700A models have a warranty. The warranty duration may differ depending on the manufacturer or retailer. Usually, buyers can get a warranty of 1-2 years. The warranty can protect buyers from defects in material and workmanship.