All categories
Featured selections
Trade Assurance
Buyer Central
Help Center
Get the app
Become a supplier
(300 products available)
Various types of trailed mowers are designed for different mowing applications and terrains. They include the following:
Sickle Bar Trailed Mowers
A sickle bar mower uses a serrated bar bladed with curved knives to harvest crops with tender stems, such as hay or certain grains. When the bar oscillates, the blades chop the stems like scissors. They are preferred for agricultural use since they work well on uneven ground and can withstand tough crops. They work well on hay and thick grass. They are preferred in agriculture for mowing hay or grasses with tough stems, such as alfalfa or timothy.
Rotary Trailed Mowers
A trailed rotary mower has one or more rotating blades under a deck or housing that cuts grass and plants like a lawn mower or brush cutter. The blades spin horizontally or vertically to chop everything evenly. It is the most common type of field mower used today because it is simple, reliable, and can handle different terrains and grasses well.
Flail Trailed Mowers
A flail mower uses many swinging hammers or knives on a rotating drum to smash or chop down heavy weeds, bushes, or grasses. The hammers look like small paddles that hit everything low like a hammer mill. It is ideal for clearing thick brush, overgrown areas, or tough vetch or bamboo too solid for other mowers. The hammers grind up everything into small pieces and then leave a clean, low-cut field behind.
Disc Mowers
A disc mower has many round blades mounted on discs that spin sideways to slice off plants and grasses. The discs roll like a pizza cutter to make clean diagonal cuts. Disc mowers are great for heavy-duty jobs since the big blades can handle thick weeds and tough plants like briars or tall grasses near ponds. They were designed for farms or large areas needing quick, efficient mowing of dense overgrowth.
Reel Trailed Mowers
Reel mowers have blades on a rotating reel or roller that clips grass like scissors. The blades are straight and horizontal, so they shear instead of chopping. It is good for special tasks like mowing uneven field edges or tall, delicate plants that need a gentle touch. They were designed for maintaining areas near crops or fences needing a clean, low, precise cut without damaging the ground.
Trailed mowers are valuable for different important tasks, including:
Large Area Grass Cutting
They make cutting grass on agriculture fields, sports fields, and large lawns quick and easy. The hooked bars or blades on the mowers attached to vehicles slice through and trim the grass evenly. This leaves behind a neat, low-cut look over big spaces in much less time and effort than manual methods. Trailed mowers are designed to handle broad swathes at once, speeding up grass maintenance on farms or around football fields.
Brush and Weed Clearing
Flail and rotary brush mowers can tackle overgrown areas and dense weeds too tough for hand tools. Their swinging hammers or rotating blades chop down briars, brambles, and other vegetation quickly. This helps clear land that's become wild or weedy from neglect. The powerful mowers leave a tidy cut path behind that prevents the plants from coming right back. Trailed mowers save hours of labor and keep trails, fields, and fence lines free of invasive growth.
Hay Harvesting and Crop Management
Sickle bar mowers work well for farmers by quickly cutting hay grass at the right angle for fast harvesting. Its special serrated blade design keeps the cut clean without damaging the stems too much. It also handles crops like oats or barley with soft stalks, so farm fields stay in good shape. The hay mower machine helps farmers get their hay in sooner, boosting yields. For tough plants like bushy weeds or sturdy vetch, disc mowers use large blade discs to slice through everything powerfully. This clears out unwanted growth without taking too long. The big blades leave behind a clean cut that speeds up land management chores on farms.
Maintenance of Natural Areas
Reel and brush mowers help keep nature trails, parks, and preserves neat by trimming grass and light brush. Its gentle cutting action is perfect for delicate wild plants that need protecting. This makes it easy to care for outdoor spaces and keep the vegetation looking nice. The mowers help prevent trails from getting overgrown and preserve the natural beauty of outdoor areas.
Slope and Bank Mowing
Trailed mowers can safely manage steep slopes and tricky embankments where other machines aren't stable. Their special designs allow them to cut grass and brush on hillsides and around ponds without flipping over. This makes slope mowers valuable for bank and slope maintenance in risky areas.
Power Requirements
Some trailed mowers use electric motors, but most are powered by gasoline or diesel engines for big jobs. The powerful engines let it cut through tough grass without slowing down.
Cutter Width and Height Adjustment
The cutting width can vary quite a bit, going all the way from 30 inches up to 72 inches. This allows it to mow open spaces quickly or fit into tighter spots. The height is adjustable, so the grass can be cut anywhere from 1 inch to 4 inches tall, depending on the desired look.
Blade Type and Material
The blades come in a few different varieties. Some have serrated edges for slicing through tough grasses like hay. Others are smooth so the mower acts more like a lawn mower, making clean, tidy cuts. The steel they are made from is heavy-duty, so they stand up to all the wear and tear of regular mowing.
Terrain Capability
Trailed mowers are capable of handling not only flat areas but also uneven terrains, such as hills or slopes. Its large rear wheels and light body let it glide over bumps smoothly.
Attachment/Dismounting System
Most trailed mowers connect with a universal hitch system, making them easily attached or removed from the back of different vehicles, like ATVs or tractors. This allows switching from the mower to other attachments quickly. Some models also have hydraulics that let the mower be raised or lowered from the cab without having to get out.
Transport and Storage
Most trailed mowers are designed to be easily towed behind an all-terrain vehicle or tractor. The compact, folding design allows the mower to be stored without taking up too much space in the shed or garage.
Here is the simple guide on how to install a trailed mower:
Prepare the ATV or Tractor
Park the ATV or tractor on a flat surface and set the parking brake. The hitch or towing ball on the back should be cleared off, so it's ready for attaching the mower.
Attach the Mower
Drive close enough that the hitch on the mower can be lined up with the hitch on the vehicle. Lower the mower platform to the ground. Then, slide the hitch onto the towing ball or hitch to secure it in place. Tighten any locking pins or clamps if needed.
Adjust the Height
Adjust the cutting height by raising or lowering the mower blades with the settings on the mower. This lets the grass be cut at the desired height based on how tall it is.
Test the Connection
Give the mower a quick shake to ensure it is firmly attached. Make sure everything is secured before starting.
The following is a simple guide on how to use a trailed mower:
Check the Area
Before starting, look over the space to see if there are any rocks, sticks, or other objects that should be removed. Make sure there are no people or animals in the area close to where mowing will occur.
Start the Vehicle
Start the ATV or tractor and let it warm up for a few minutes before beginning work.
Adjust the Blades
Use the levers on the vehicle to raise or lower the mower blades. Set them to the highest position for a light trim or the lowest for a deep cut, depending on the job needs.
Begin Mowing
Slowly drive the vehicle forward to start mowing the grass. Move steadily in straight lines without rushing so the mower can do an even, clean job. Keep an eye on the ground as the mower works to make sure no hidden objects are struck.
Monitor Performance
Carefully watch how the mower and vehicle are working together as it mows. Adjust the speed slower or faster as needed depending on how thick the grass is. If the engine starts straining, take a break and let everything cool down before continuing.
Finish Up
Once the area is completely mowed, drive back over previously cut sections if needed to even things out. Go in the opposite direction to make sure no tall patches were missed.
Here is a maintenance and repair guide for a trailed mower:
Blade Care
Check the blades weekly for sharpness and signs of wear or damage. Sharpen them if they become dull using a special sharpening tool so cuts are clean. Replace any cracked or broken blades fabricated from heavy-duty steel.
Oil and Fluid Checks
Refer to the manual to locate the mower's oil reservoir and other fluid containers. Regularly inspect them, making sure oil and liquid levels are sufficient. Add the recommended oil type and fluids as needed to keep everything properly lubricated.
Engine Upkeep
Look at the engine area to see if any dirt or debris has built up inside. Use a brush or cloth to carefully wipe it clean. This allows the motor to stay cool and run its best. Check air filters frequently and swap them out if they are clogged with grime.
Frame and Body Assessment
Look over the mower frame and body for any bends, cracks, or signs of aging. Tighten loose pieces and replace a failed frame bent out of shape from hard work.
Tire Inspection
Examine tires for low air pressure or cuts in the rubber. Maintain proper inflation levels and replace worn-out tires so the mower moves smoothly.
Regular Cleaning
After each use, clean the body with a brush or rag to remove dirt, grass, and grime that accumulated in the course of work. This prevents build-up that can damage parts as it sits.
Properly Attaching the Mower
When connecting the trailed mower, it's crucial to ensure the hitch is securely fixed without being too loose or tightly bound. This guarantees stability as it's towed. Safely detaching it when necessary relies on having that strong yet flexible anchoring.
Engine Check
Every job should begin with an inspection of the engine and other internal components. Looking for anything out of the ordinary helps reduce the chances of major repairs while increasing the lifespan of its intricate parts.
Proper Tire Inflation
Keeping the tires fully inflated is vital, as is confirming the treads aren't worn down. Solid tires ensure good control over different terrains, allowing for safer and easier mowing under all conditions.
Cuts and Damaged Area
A trailed mower should be used cautiously to avoid cutting anything dangerous, like wires or big rocks. Mowing near water bodies should be done with special care to ensure nothing affiliated with safety gets damaged.
Wear Sturdy Boots
It's important to wear hardworking shoes like boots instead of flip-flops or other open footwear. With sturdy footwear, there's less chance of tripping over attached parts or stumbling in the area where mowing occurs.
Eye Protection
Working with a trailed mower can send flying debris, so wearing goggles or a face shield is worth it. The eye protection acts as a barrier and keeps the eyes safe in case anything dangerous comes flying toward them.
Muffler Coolness
Once the engine is turned off, it's important to wait a short time before touching the muffler. The trailed mower might have a very hot muffler that could burn badly if someone touches it right after the engine shuts down.
Proper Servicing
Prior to performing any sort of servicing on a trailed mower, one should ensure that all moving parts have come to a complete stop and are not able to rotate. Attempting to touch or get near these parts while they are still in motion can potentially result in serious harm.
A1: The main job for a trailed mower is to cut down grass and brush over open areas quickly and with amazing efficiency. Its large attachments help it finish the job nice and fast, especially in places where rotary brush cutters would struggle.
A1: The big rear wheels and light build letting it glide smoothly over uneven surfaces are the parts that enable a trailed mower to work well on various terrains.
A3: Universal hitch systems are designed for easily connecting to different vehicles. That makes switching out other jobs effortless.
A4: One should survey the space to remove any objects and check that no living things are nearby before starting up the machine.
A5: Routine upkeep including regular inspections of the blades is important, along with rigorous oiling and consistent cleaning after each use. This ensures the machine performs at its finest for as long as possible.
