All categories
Featured selections
Trade Assurance
Buyer Central
Help Center
Get the app
Become a supplier
(201 products available)
The 4921322 temperature sensor is a vital part of several important car components. It measures the temperature of coolant fluid and sends signals to the engine control unit (ECU). There are different types of temperature sensors, each with features based on the vehicle and function, as explained below.
Coolant Temperature Sensors (CTS)
The temperature sensor 4921322 controls the temperature of the engine coolant in vehicles. It informs the ECU about the coolant temperature, allowing the ECU to adjust fuel mix and ignition timing to avoid engine overheating or undercooling. Thus, the system ensures proper engine performance. Since it's such a vital element, businesses should stock auto temperature sensor parts for loyal customers who need engine repairs.
Intake Air Temperature Sensors (IATS)
The IATS measures how heated air is within the intake manifold. It sends the air temperature data to the ECU, which adjusts the fuel air mixture for proper combustion. This helps the engine run smoothly with good power and fuel economy. Using an IATS, cold air into the engine boosts oxygen levels for better combustion and improved performance. Temperature sensor 4921322 can be found in many intake manifolds, meaning it works like the IATS in some cars.
Engine Block Temperature Sensor
The temperature sensor 4921322 is also used to measure the temperature of the engine block in heavy-duty diesel engines. It helps prevent overheating by giving the ECU constant temperature readings to achieve safer and better engine performance. This sensor is critical for people managing fleets and heavy-duty vehicles since it maintains powerful engine health and avoids breakdowns.
Transmission Fluid Temperature Sensor
Automatic transmission systems use a temperature sensor to measure the heat level of transmission fluid. Thus, it helps maintain optimal fluid viscosity for smooth gear shifting. If the sensor detects overheating, it informs the ECU, which can then prompt protective actions like fluid cooling. Businesses must focus on effective maintenance solutions for customers to keep their automatic transmissions in good health and functioning properly.
Exhaust Gas Recirculation (EGR) Temperature Sensor
EGR systems use 4921322 sensors to measure the temperature of exhaust gases going back into the engine for recirculation. With these readings, the ECU can control the EGR valve, optimizing emissions reduction and engine efficiency. Thus, the sensor helps balance EGR activity with temperature limits to avoid harmful emissions. People with strong environmental concerns will prioritize keeping this sensor in good shape so their vehicles can stay emission compliant.
A few key factors can help one make the right choice when looking for vehicle spare parts to sell, such as the temperature sensor 4921322. These factors increase the chances of getting quality products and satisfied customers.
Product Quality
When it comes to selling automotive temperature sensors, quality should always be the first priority. Go for reputable brands that produce durable temperature sensors made of strong materials like stainless steel or reinforced plastic. These parts will serve customers longer and reduce the need for replacement. One will also need to pay attention to the manufacturing process of the sensors. Find sensors manufactured with cutting-edge technology and strict tolerance standards to boost performance. Quality products enhance customer satisfaction and loyalty, and they may also help avoid or reduce warranty claims.
Compatibility
Always keep in mind that not every car part will be compatible with every vehicle. So, ensure that the temperature sensors one stocks fit a lot of different makes and models. This should make it easy for businesses to appeal to a wider customer base. As people go online for information, those who prefer aftermarket sensors should be able to find and choose compatible ones easily. Use online databases to determine which models the sensors are meant for.
Bulk Pricing and Availability
It is no secret that one gets better deals when buying vehicle temperature sensors in bulk. That bulk pricing makes it so much easier for one to offer competitive prices and decent profit margins. Focus on reliable suppliers who can consistently provide the 4921322 temperature sensors in large quantities without delay. Having enough stock will mean one can meet demand without lag. Considering seasonality and market trends, plan inventory ahead of time. This prevents overstocking of slow-moving items or stock-outs of popular ones.
Shipping Costs and Times
Shipping costs greatly affect the business operating costs. When selecting a supplier, pay attention to the shipping expenses offered and delivery time. Fast and cheap shipping makes for happier customers. Also, suppliers who ship quickly help avoid situations where customers order something they can't get immediately and then have to deal with backorders. Fast and reliable order fulfillment improves the customer satisfaction score and retention rate. Therefore, only work with suppliers who can consistently deliver the products one needs on time.
The 4921322 temperature sensor comes with various important aspects that buyers consider when searching for the right sensor. The features below set this sensor apart from competitors and impact how well it performs.
Material
Quality materials are used to manufacture the 4921322 engine coolant temperature sensor. The sensor tip is usually made from nickel-plated copper alloys or stainless steel for better conductivity and resistance to corrosion. These ensure the sensor survives in extreme temperature settings while accurately measuring coolant temperatures. Good materials make the sensor more durable, which ultimately helps customers save repair costs.
Precision and Accuracy
The 4921322 temperature sensor is designed to measure the temperature of coolant fluid and do so accurately and consistently. It has a wide temperature range, so no matter how hot or cold it gets, it will always give an accurate reading. This lets the car's system work better and keeps other parts from overheating, so customers know they'll get a reliable product. Sensors using high-precision resistive elements or thermocouples deliver consistent temperature readings, thus enhancing engine functionality.
Easy Installation
The design of the 4921322 sensor enables its installation without many complex procedures or special tools. Its design allows for a simple plug-and-play installation that helps reduce labor costs, especially for customers operating auto repair businesses. The ease of fitting also minimizes the chances of errors during installation and gets the car back on the road faster. The design of this sensor improves productivity in the workshop and reduces the vehicle downtime count.
Signal Output
The 4921322 temperature sensor sends precise signals to the engine control unit (ECU), helping the vehicle run properly. It uses a resistive element that changes resistance based on temperature, allowing it to provide accurate voltage signals to the ECU for effective temperature regulation. Good signal quality makes the ECU perform optimal fuel adjustments, ignition timing controls, and even emission reductions. Consequently, customers benefit from improved engine operation, enhanced fuel efficiency, and lower emissions.
OEM Compatibility
The 4921322 temperature sensor was created to be compatible with many vehicle makes and models. This means it will easily replace broken original equipment manufacturer (OEM) sensors without requiring system changes. Because of this, customers will prefer it for easy repairs or part replacements to keep vehicles functioning well. Its universality also increases the customer's application options and reduces inventory for several references.
To function and live longer, the 4921322 temperature sensors require proper handling and yearly checkups and maintenance. Follow the guidelines below to help customers increase the usage and durability of their sensors.
Installation Tips
Using the temperature sensor 4921322 requires correctly fitting it during installation to get accurate readings. First, ensure it's connected to the right plug and that the temperature probe is fully immersed in the coolant. Proper sealing prevents coolant leaks and signal fluctuations. Also, make sure the threads have Loctite; this reduces the chances of the sensor vibrating away from its position due to engine movements while driving. Following these steps allows the sensor to deliver reliable temperature data during usage.
Regular Monitoring
Consistently monitoring temperature variations is crucial to detecting issues with the 4921322 sensor early on. Keep checking if the vehicle's performance changes, such as with engine overheating, underperformance, or irregular idling; these may be linked to temperature sensor problems. Clients can use a diagnostic scanner to compare temperature readings and actual data to see if the sensor provides accurate readings. Early detection of irregularities ensures timely interventions to avoid engine overheating or reducing performance.
Periodic Calibration
Over time, the 4921322 tire pressure monitoring system (TPMS) can give incorrect readings because the sensor might wear out or get damaged. Every few years, one should make it a point to send the sensor to a professional for calibration. It's also best to have it checked after any major repair or replacement. Calibration keeps the sensor in tip-top shape and ensures it gives accurate readings all the time. It also helps customers avoid big car problems down the road.
Diagnostic Tools
Customers who need to check whether the 4921322 sensor is malfunctioning can use a scan tool or OBD-II gadget. This will show how hot the engine is, which can help the user ensure that the temperature sensor is working perfectly. If there is a big difference between what's being shown and how hot the engine is, the sensor must be replaced. After some time or many miles, the 4921322 may stop working properly. People can avoid various issues with the engine by replacing the sensor.
Preventive Maintenance
Prevention is key to keeping the 4921322 temperature sensor working well. Clear any dirt, debris, or coolant deposits off the sensor to stop it from overheating. Also, inspect the wiring for any signs of damage, and make sure all electrical connections are nice and tight. Schedule maintenance checks to ensure the sensor is functioning as it should, allowing clients to avoid future engine problems. Keeping up with these care routines helps the sensor stay good for many years.
A1: The 4921322 temperature sensor is found in various Chrysler Group models. Some cars include the 200, Aspen, Chrysler 300, Cirrus, Concorde, PT Cruiser, and Dodge Avenger, Caliber, Charger, Dakota, and Durango. Other vehicles that might use the 4921322 sensor are the Jeep Commander and Grand Cherokee. Note that the sensor also has different various OEM numbers.
A2: Several factors can influence temperature sensors, such as improper installation, damaged wiring, and leaks. Regular maintenance and comprehensive diagnostic checks help prevent or correct such issues and ensure accurate readings. Temperature fluctuations and external factors like engine load and weather conditions can also affect the sensor readings.
A3: A mechanic can identify faulty cooling system temperature sensors using an advanced scanning tool. The gadget will be used to compare actual coolant temperature values and the values the Sensor sends to the ECU. If the readings don't match, the sensor is faulty. Other options are also available, like resistance checks. However, the scanning tool is quicker and more efficient to diagnose the problem.
A4: Yes, as long as it is made with good materials and follows OEM specifications, an aftermarket temperature sensor for cars will work just as well as a genuine one. They give the same performance while costing less. Many come with extra features or improvements that can boost how well they work. Today's aftermarket parts are also built tougher than before and can handle wear and tear for as long as the OEM ones.
A5: Temperature sensors are model-specific, so choose one based on the car's make and model to ensure it's compatible. Consult the service manual or an online database to get the proper sensor details. Also, ensure the aftermarket sensor meets OEM standards for accuracy and reliability to provide clients with the best experience possible.
