All categories
Featured selections
Trade Assurance
Buyer Central
Help Center
Get the app
Become a supplier
(518 products available)
Ready to Ship
Ready to Ship
Tek screw manufacturers produce several kinds of Tek screws, which are strong self-tapping screws for metal constructions. The following are the main types:
These are designed for fastening two or more metal parts. They have threads that provide a deep grip into metal surfaces for a sturdy connection. The pointed tips help in drilling through metal without needing a pre-drilled hole, thus saving time during assembly.
These types are intended for use with plastic components. They are crafted in such a way that their installation does not crack or damage the plastic material. Just like others, their pointed threads and tips allow for easy self-drilling.
Insulation Tek screws are specially made for fastening insulating materials, like foam boards to metal frameworks. These usually have a large washer head to hold insulating boards firmly against metal surfaces. Most of the time, they come with a nylon or plastic soffit that protects the insulation from water and other environmental factors.
Metal roofing screws are specifically meant for attaching sheets of metal roofing to underlying structures. Their unique design allows them to secure metal sheets firmly in place. They often carry a neoprene washer on the shaft for this kind of weatherproofing and sealing against moisture leaks.
Just like other lag bolts, these are made for heavy-duty connections. They are larger in size and, therefore, can carry heavier loads than regular Tek screws. Their self-tapping design allows them to screw directly into wood or hardened materials without needing a pilot hole.
These are intended specifically for fastening different types of sheet metals together or to other surfaces. Their threaded full length gives an even tighter grip on thin metal sheets. They come in varied sizes and head types so as to suit different sheet metal applications.
Tek screw parts are made from various materials, each chosen for their strength, corrosion resistance, and ability to self-tap through different surfaces. Here are some common materials:
Carbon steel is the most popular material used in Tek screws. It provides good strength and toughness necessary for drilling into metal surfaces. Sometimes, it is further alloyed with other elements to increase hardness or improve resistance to wear and tear of general use.
Some Tek screws are made of stainless steel. They provide excellent resistance to rust and corrosion, so ideal for outdoor and marine applications. The non-corrosive nature also ensures longevity and durability of the screws while requiring less maintenance.
High-carbon steel is used to make Tek screws because of its greater hardness and strength. The material is therefore ideal for heavy-duty applications where the Tek screws must bear high loads or resist deformation upon use. The only drawback of this material is that it is prone to rust and therefore needs protective coatings.
Aluminum is the chosen material for Tek screws where lightweight and corrosion resistance properties are a must. While not as strong as steel, aluminum is sufficient for securing lightweight materials, making it preferred in HVAC systems and siding installations.
Steel coating with zinc, ceramic, or polymer coatings provides added resistance to corrosion without compromising on the strength of steel. The coatings also offer extra protection against environmental elements, further extending the lifespan of the screws.
Tek screws find extensive application across multiple industries due to their versatility and ease of installation. Here are some common uses:
In the heating, ventilation, and air conditioning industry, contractors use these screws to attach ductwork and other components. Their self-tapping ability allows installation right into existing metal or other materials without needing pre-drilled holes. This feature saves time while ensuring secure fastening in either suspended ceilings or sheet metal enclosures.
Contractors fastening metal panels on both walls and roofs across all building types utilize Tek screws for metal cladding and siding. Their weather resistance properties and ability to create leak-proof seals also make them ideal for securing cladding in variable weather conditions.
Manufacturers use Tek screws to fasten body panels, bumpers, and other components to vehicles. Their sharp threaded tips allow easy penetration through metal and lightweight as they come do not add any significant weight, unlike other heavy-duty fasteners.
Tek screws with sealing washers are standard for attaching metal roofing sheets to structural frames. They provide durable, weather-tight connections that withstand the pressures exerted by extreme weather elements like rain, snow, or wind.
In the solar panel installation process, these screws are ideal for fastening mounting brackets that support the solar array to the roof structure. Their self-drilling capability allows easier installation of the brackets onto the often tough roof materials.
The marine industry uses these screws for boat hulls, decks, and fittings fastenings. As they have been designed to resist saltwater corrosion, they provide enduring durability for boat and yacht exteriors' secure and long-lasting maintenance.
In electronics, designers use these screws to assemble casings, heat sinks, and internal components. Their ability to penetrate thin sheets of metal or plastic while providing a snug fit makes them ideal for securing delicate electronic components without causing damage.
Here are some tips for wholesalers to consider when choosing the right Tek screw for distinct customers:
Metal thickness - Different types of Tek screws have different thread diameters and lengths. These are qualities that affect the ability of the screw to drill into metal. For example, metal-to-metal Tek screws have longer threads to penetrate thicker metals than screws designed for plastic.
Washer - A Tek screw with a washer should be used to fasten metal roofing so that a leak-proof seal is formed. The washers also help distribute the load across a wider area, thus preventing the material from being damaged. The size and type of washer needed depends on the project to be undertaken.
Corrosion resistance - Various types of metals have various degrees of corrosion resistance. For example, stainless steel Tek screws have more corrosion resistance than carbon steel ones. Aluminum Tek screws are also as good for securing HVAC ducts in outdoor applications.
Head style - Different head styles serve distinct practical and aesthetic functions. For example, slotted heads are basic and are only used for light-duty applications. As for hex-headed screws, they are designed for heavy-duty industrial projects. Head styles that offer a washer-like bearing surface provide more strength and are better at sealing against water intrusion.
Coatings - Any wholesaler that operates in high-humidity or saltwater environments should stock up on Tek screws with coatings. Some screws have a proprietary zinc coating that serves effectively to resist moisture-related corrosion. Other screws use a ceramic coating to provide dielectrical protection to electronic devices.
A1: There are special screws used for drilling into metal, plastic, insulation, or even themselves, thus creating a strong fastening. This self-drilling feature makes them ideal for methods requiring quick and effective installation without the need to first drill a pilot hole.
A2: An engineer named John inventively designed the Tek screw as a special fastener meant for self-tapping, allowing it to drill into metal surfaces with its unique threaded tip.
A3: Unlike regular screws, which typically require pre-drilling, Tek screws are specially designed self-drilling fasteners that penetrate various materials, including metal and insulation. While regular screws are intended for general fastening tasks, Tek screws excel in heavy-duty applications that include construction and manufacturing.
A4: No, not all Tek screws are insulated. Only coating Tek screws, which are meant to secure insulation materials, incorporate a coating to protect the insulation from damaging elements.
A5: Metal studs use sheet metal screws as their threaded shaft can easily penetrate thin metal sheets to create strong fastenings. These screws often have varied head types to suit distinct applications.
