All categories
Featured selections
Trade Assurance
Buyer Central
Help Center
Get the app
Become a supplier
(1638 products available)
Solar batteries come in various types that are suitable for allowing the energy captured by solar panels to be stored for later use.
The following options are available within the category of a solar battery 350Ah:
These are some of the oldest and popular solar batteries. Specifically, they include both flooded lead-acid (FLA) and sealed lead-acid (SLA) batteries). FLA batteries tend to be less expensive and require more maintenance, while SLA (gel and absorbent glass mat) batteries are easier and comfortable to maintain. Lead-acid batteries are known for their strength and performance well when used for off-grid solar systems.
Thanks to technology advancement, lithium-ion batteries became more commonplace. These batteries tend to be compact with higher energy density, longer lifespan, and lower maintenance requirements compared to lead-acid batteries. They are more expensive at the beginning but eventually become a better investment in the long run, as the requirement for replacing them is often very minimal, and they tend to be very efficient at their work (especially the daily cycle). There are many variations of lithium-ion batteries available in the market, namely Tesla and others, but the NMC and LFP versions are more portable and usable in the renewable energy segment.
They utilize sodium instead of lithium, and while they are newer to the market than lithium-ion batteries, they offer the same benefits at a lower cost. Sodium ion batteries can be a sustainable alternative as sodium is highly recyclable and more readily accessible compared to lithium.
Gel batteries are a type of lead-acid battery in which the electrolyte is mixed with silica fume to form a gel-like substance. This process makes the electrolyte more viscous and reduces sedimentation. With their sealed design, gel batteries require little maintenance and are safe to use.
Solar batteries store energy from the day to be used at night or during power outages. This gives consumers constant access to electricity no matter what, even when the sun is no longer set. With a solar battery 350ah, homes can reduce their reliance on grid power, lower energy costs, and gain energy independence.
In remote and rural areas where the electrical grid is not present, solar batteries provide an essential electricity source by storing energy generated from solar panels. This makes it possible to deliver power in isolated locations and during outage hours.
Large businesses and commercial buildings use solar batteries to lower electric bills by avoiding peak rate times. They also provide backup power during outages and improve sustainability for green business initiatives.
Utilities employ solar batteries at a large scale to store surplus energy from solar fields during the day for later use when demand spikes. This method helps to stabilize the electric grid and guarantees a reliable power supply.
With the increasing popularity of electric vehicles, solar batteries are now installed at EV charging stations. They store solar energy to charge electric vehicles, providing a clean and renewable energy source for transportation.
Solar batteries power water pumps, irrigation systems, and farming equipment in agriculture and farming operations. This ensures farmers have the necessary energy resources even when the grid goes out or it is unreliable.
In telecommunications, solar batteries power cell towers and communication equipment. This keeps mobile networks operational in remote locations and during power outages, improving reliability and coverage.
Solar batteries can be installed in several types of locations, such as indoors or in a sheltered outdoor environment, where they can be protected from the extreme outdoor weather. Prior to installation, it's necessary to ensure the battery is mounted in a secure, safe, and stable position where it won't have the ability to move around at all.
Solar batteries should be connected to an inverter that converts the stored direct current (DC) electricity into alternating current (AC) electricity for usage in frameworks. Finally, batteries have to be connected to a solar panel system to enable the charging process. This is done by connecting the battery to the solar inverter, which is then connected to solar panels. The configuration then allows solar power to be stored in the battery.
To ensure the battery performs exceptionally well, carefully read and follow the manufacturer's recommendations because batteries may have certain requirements regarding charging, discharging, and operating temperature. For optimal performance, it is necessary to maintain a system that connects the battery to solar panels and the electric load so it can be constantly charged and utilized.
To achieve maximum lifespan, avoid discharging the battery beyond its DoD limit and avoid overcharging. Monitor the battery's state of charge (SoC) to ensure it stays within the recommended range, which is often between 20% and 80%. Never exceed the manufacturer's DoD, which is the percentage of the battery's total stored energy that can be used.
Occasionally check battery health and performance to ensure the individual cells are balanced and there are no signs of wear or damage. This often requires visiting the maintenance schedule set up by the manufacturer.
Many solar batteries require more maintenance than others. In detail, lead-acid batteries have to be filled with water and equalized, while lithium-ion batteries require very little work. The 350Ah solar battery maintenance practices include cleaning terminals, checking for corrosion, monitoring state of charge, and software updates. Repairing the battery might include replacing some parts, but maintenance helps extend its lifespan.
Li-ion and lead-acid batteries have their unique operating system requirements. For instance, lithium batteries require a compatible inverter (MPPT). On the other hand, lead-acid batteries are compatible with DC and AC inverters.
Lead-acid batteries are relatively cheaper and easy to replace. They have a proven track record of being reliable. However, they require high maintenance, are large, and take longer to charge. On the other hand, lithium batteries are smaller, low in maintenance, and take less time to charge. They are expensive and hard to get; some are flammable.
DoD indicates how much stored energy can be used without affecting the battery's lifespan. For lead-acid batteries, the DoD is 20%, while for lithium-ion, it's between 80% and 90%.
Round-trip efficiency measures the percentage of energy the battery will be able to store and then convert back to the system. Higher efficiency means more solar energy will be able to be stored and used.
Warranty is a good comparison point when selecting a solar battery. A typical lithium-ion battery offers 15 years of service, while a lead-acid battery only lasts for 5 years. Lithium-ion also has a higher cycle count, meaning more usage.
A1: The battery's 350 Ah capacity means it can store a lot of energy, making it ideal for off-grid or backup power systems requiring energy for long periods. It provides reliable power for homes and businesses, even during outages.
A2: A solar battery stores excess energy generated by solar panels for later use. It provides power when the sun isn't shining, allowing homes and businesses to use clean, renewable energy even at night or during outages.
A3: A solar battery's lifespan depends on usage and maintenance. Typically, lithium-ion solar batteries can last 10-15 years, while lead-acid batteries may last 5-7 years. Proper care and staying within recommended discharge limits can help extend the lifespan.
A4: When choosing a solar battery, consider the following: battery chemistry (lithium-ion or lead-acid), compatibility with the solar system size, depth of discharge, efficiency, warranty, and costs.
