All categories
Featured selections
Trade Assurance
Buyer Central
Help Center
Get the app
Become a supplier
(5 products available)
Suppliers provide the following types of sil ac adaptors to buyers in bulk.
SIL AC adaptors are common for desktop and conventional equipment. They can vary from 50mW to over 1.5kW. Manual equipment such as clips, soldering irons, drills, and pumps are powered directly by these adaptors. They require reliable power with no draw on an uninterruptible power supply (UPS). The steady output makes them ideal for industrial usage.
Half Brick SIL AC adaptters are compact and high-density modules typically used in space-constrained applications. They feature power ratings from 100W to 500W. Also, they offer high efficiency and low standby consumption. Half Bricks provide a regulated output, making them suitable for battery-operated devices requiring longer life. Their compact design and high power enable usage in various applications.
Low Profile Sil AC adaptors have a minimal profile design and are fit for applications where space is limited. Their typical profile is less than one inch in height, but they deliver from 50W to 200W. Their low standby energy consumption makes them apt for energy-efficient designs.
Programmable SIL AC adaptors can be configured to deliver various voltages and current levels. The flexibility enables the use of different equipment from a single power source. These adaptors serve dynamic applications that require variable output for testing or operational adaptability. They are typically available in power ratings from 50mW to 1kW.
Here are some industrial applications for the sil AC adaptors.
In manufacturing industries, SIL AC adaptors power many machines and equipment. This may include automation systems, robotic arms, and precision tools. Due to their reliability, these adaptors ensure smooth production booking without power fluctuations. This directly impacts operational efficiency and productivity.
Supplier's SIL AC adaptors are milled to support communication infrastructure. These adaptors power devices such as routers, switches, and signal repeaters. Constant and stable power delivery by these adaptors is vital for uninterrupted communication services. This allows feed connectivity in telecommunications systems, which enables seamless connectivity and data transfer.
SIL AC adaptors drive medical devices in healthcare, from diagnostic imaging systems to patient monitoring equipment. They ensure these devices operate dependably. Also, they fulfill the reliability and safety standards required in medical environments. By providing uninterrupted power, SIL adaptors contribute to accurate diagnosis and consistent monitoring of patient health.
Finance sectors depend on these adaptors to power their data servers and processing systems. The demand for constant and reliable power is high in this sector. Fluctuations can lead to data loss or system failures. Therefore, they provide the power required for computational workloads, transaction processing, and online banking systems with high efficiency.
The energy sector, particularly renewable energy sources, uses SIL AC adaptors. They help power monitoring systems, control units, and inverters within solar and wind energy systems. Their adaptability to different energy system requirements makes them suitable to ensure these systems operate efficiently. This increases contribution to the green energy movement.
The following are some key specifications and features for the sil AC adaptors.
Output Voltage: These adaptors normally operate at voltages of 5V to 15V. This depends on the model or usage applications.
Input Voltage Range: This model varies its input voltage from 90V to 264V. It allows normal usage within various regions.
Efficiency: Silicon adaptors have more than 85% operational efficiency. It is a required standard to minimize energy losses.
Operating Temperature: The standard operating temperature range for these adaptors is 0 to 70 degrees Celsius. This is a normal range for their typical uses.
Compact Design: The adaptor comes with a small footprint, making it easy to install even in space-constrained areas.
High Efficiency: These adaptors incorporate switching technology. This means that most of them achieve over 90% efficiency for low heat generation during usage.
Wide Input Range: Most of these adaptors accommodate a broad input voltage range. Some adjust auto to accommodate 90V to 264V inputs for global compatibility.
Multiple Output Voltages: Some models have programmed outputs. Some have outputs for various voltages. This allows flexibility for multiple devices.
When choosing the sil AC adaptors, buyers should consider the following factors.
Determine the power demanded by the device or system to be connected to the adaptor. The established power is normally expressed in watts or volts. Then choose an adaptor that can manage this requirement. Using an adaptor with inadequate power can result in insufficient performance. On the other hand, overloading means that operating adaptors can also be expensive.
Ensure the input voltage of the adaptor matches the voltage of the power source. For output voltage, ascertain that the output voltage of the adaptor coincides with the device connected to it. This ensures compatibility. Output and input voltages allow for effective power distribution without damaging the device or adaptor.
Although adaptors from different brands may offer similar features, their quality and performance differ. Go for those named brands that offer reliable and consistent performance. Read online reviews and testimonials to unearth user insights. Select the ones that will answer buyer needs while still maintaining quality.
Safety standards ensure that the adaptor is manufactured with reliability and quality in mind. Look for those certified by UL or CE. These adaptors normally have extra features like over-voltage or short-circuit protection. This ensures not only the safety of the device but also the user.
A1: In manufacturing industries, SIL AC adaptors are a major source of power for many machines, equipment, and tools. Due to reliability in power delivery, they ensure smooth production processes without power fluctuations. This increases operational efficiency and productivity.
A2: Yes, many of these adaptors incorporate high efficiency, typically above 90%. This reduces energy waste and heat generation during usage. Therefore, low standby consumption ensures minimal energy usage even when the device is not active. This saves energy costs while minimizing environmental impact.
A3: Yes, these adaptors can drive industrial equipment. They specifically accommodate varying power and voltage needs. They provide stable and reliable power for many heavy-duty applications. This includes manufacturing machinery, robotic systems, and automation tools commonly used in production plants.
A4: Normally, these adaptors are designed for indoor uses. This is due to their sensitivity to environmental factors. However, some models are sealed and rated for higher protection against dust, moisture, and extreme temperatures. They can be used in outdoor applications.
A5:To ensure reliability, buyers should go for those with the international standard for quality. Seek adaptors with safety certificates and endure products from companies with a proven historical record of reliability. Read reviews, select products with warranty coverage, and compare different manufacturers to ensure only the reliable ones are acquired.
