All categories
Featured selections
Trade Assurance
Buyer Central
Help Center
Get the app
Become a supplier
(26884 products available)
Industrial safety harnesses are mainly designed for use in some specific work environments, and they are made in several configurations to cater to different needs. The serious functions of the safety harness are to provide a worker with the necessary support and protect him or her from any form of injury or death because of falling from heights, mainly in construction, maintenance, and other related sectors.
A full-body harness is a type of industrial safety harness comprising several straps. These straps secure users at the shoulders, waist, and thighs, hence distributing all the fall impact to the considerably large area of the body. It is mainly used in construction, shipbuilding, and even under-surface work where vertical or over-angled working requires proper anchoring. Full-body harnesses ensure workers are safe and comfortable and that their movements are not inhibited to allow them a free range of motion while affording protection against falls.
This is a more restrictive garment that covers only the upper body and is mainly used in some vertical operations, like caving and climbing. A chest harness safety belt lacks a lower body section, which means it does not provide complete fall protection. However, it helps secure a worker in a particular position to limit falls. One of its main functions is to be used in conjunction with other fall protection devices, such as full body lower torsal harnesses. This harness is thus mainly used as a supplementary securing device to be used with other primary harnesses.
While many safety belts mostly consider fall protection secondary features, their restrained design makes them ideal for specific tasks where a person may not be working at very high altitudes. These belts are generally used to secure workers during maintenance work on hanging electrical installations or shipbuilding. The safety waist straps mainly provide lumbar support and are, therefore, comfortable when worn for extended periods. Since safety belts only cover the waist area, fewer restrictions on movement mean that during tasks that require agility and flexibility, they are quite helpful. However, safety belts should never replace the features of a full-body harness, especially when the risk of falling from the height is concerned.
The working of construction sites, the most demanding work environment for the use of fall protection, is done mainly at height. Workers use full harnesses when carrying out duties such as framing, roofing, installing windows, and working on scaffolding. These harnesses are designed to give maximum freedom of movement while at the same time ensuring that they are safe from falling from heights. Other industries like western offshore oil and gas work, which are done mainly at elevations, also use industrial safety harnesses.
In industries such as building maintenance, cleaning, or even painting, workers have to engage in suspended work, where they will need to use safety harness belts for protection. They use safety harness and security equipment while working on the exterior of a tall building, like window cleaning using abseiling ropes. These belts help protect them when working outside any edges.
Industrial safety harnesses are also important in confined space entry, as they are very useful in vertical confined spaces. Workers in this space, which may include pipelines or sewers, use full-body harnesses for climbing and descending while protecting them from any falls. The harnesses are connected to a retrieval system in the restricted area in case of any emergency evacuation.
Utility workers who are called electricians and masons work at big heights and work in confined spaces or work on suspended lines. While working on overhead power lines or electric wires, one needs to wear a safety belt and a harness, as these are important in the proper support and prevention of any fall. These belts provide great comfort and secure the workers during lengthy deployments, making them suitable for long hours of use.
The rigging and hoisting processes, popular in construction and industrial settings, involve lifting heavy loads. Workers in these sectors widely use safety harness belts during rigging operations and handling hoists. The harnesses ensure that the riggers remain restrained while locking them in system, preventing falls and enabling them to work with a measure of safe and secure confidence.
Several technical features of industrial safety harnesses and safety belts are very important for their performance, safety, and comfort. One common feature is the designs used for load distribution. In a full-body harness, several padded points help to eliminate harness pressure in areas such as the shoulders, back, and thighs. Materials used to make the straps are often high-tenacity polyester or nylon, as these are very strong and will not wear off easily. It is important to note that metal components such as buckles and D-rings are made of steel alloys, including forged, which improve resilience and corrosion resistance. This is important to maintain its strength and functionality.
Industrial safety harnesses and safety belts have to be fitted properly to provide the required level of protection. A full-body harness should be worn with all straps well-adjusted and fitted to the persons' physique. That means that the shoulder straps should not be loose; that is, the body should be able to fit two fingers between the straps, and the waist belt is not supposed to sag. Only use a safety belt using the tongue buckle system with the center of the belt locking over the wearers' waist and securing a proper and tight fit.
There are some commonly used industrial safety harnesses and safety belts, including specification re-certifying after a specified minimum duration of use, typically within three years. There are various ways to test the harness: load-bearing tests are performed, and the webbing may be subjected to tensile stress in a laboratory to confirm its elasticity parameters. Other critical tests include a fall factor test designed to check the performance of the energy absorbers under extreme conditions in the field.
Maintenance has a great effect on its durability. A full harness just requires routine washing and internal examination to maintain its integrity. Most can be washed in cold water with mild soap, but they should not be left in an aggressive cleaning solution for too long. Pockets, metal fasteners, and webbing should be closely inspected for any signs of metal fatigue, tears, and corrosion or wearing. Annual servicing is advisable because a competent person may examine the device in detail and replace defective parts.
The mainstay of the safety business is the selection of the right suppliers. Buyers need to handle carefully how they source their safety harnesses and safety belts, as these directly affect the end product's reliability, quality, and performance. Choose manufacturers with good industry standing who can prove compliance with important standards such as CE, ANSI, and OSHA. Buyers also need to look for suppliers that have a wide product portfolio, given the nature of the business. Buyers should offer such certification as ISO, meaning that the quality of the safety harness and safety belt will be constant over time to secure long-term strategic partnerships with them.
For customers in this niche, communication with the clients and understanding their needs is crucial since construction safety harness and safety belts come in various models with various functions. Buyers should offer consulting services and provide clients with the necessary information to select proper harnesses for their industry or task. Another good value-added service is providing training on the proper installing and usage of these products. Education on the importance of proper usage not only helps increase clients' interests in the business but also catapults the clients as word-of-mouth advertisers due to satisfaction with the results.
Fortunately, the harness and safety belt business can increase product ranges by adding complementary goods. Companies can supply safety equipment and a harness, including head protection, safety helmets, reflective jackets, safety shoes, and gloves. Investing in personal restraint systems, such as lanyards and shock absorbers, is crucial. Purchasing Lifting and Rigging products like slings, pulleys, and carabiners also offers diversification. This approach offers better protection and shields customers from the risk of falling.
Buyers should craft marketing campaigns focusing on the specific audience. Construction firms, industrial plants, and maintenance outsourcing agencies are some of the markets for industrial harnesses and safety belts. Harness and safety belt business stories should be circulated through email, targeting industries in which the product may have cases of usage. Offers can be based on warranty extensions or on-the-job training, incentivizing several employers to make bulk purchases.
Buyers should monitor industry developments and be aware of changes in safety criteria or innovations in personal protective equipment (PPE). By doing so, they can check stock levels and keep on supplying the most suitable safety harness and safety belt products. In strategic sourcing, harness and safety belt products from innovative manufacturers keep customers ahead of the competition on quality.
A1: Regular cleaning of the harness and safety belt is necessary, and there should be a check for wear or tear signs.
A2: Yes, they are made of breathable materials, making them comfortable during hot conditions.
A3: This depends on how often it is used, but generally, the manufacturers advise that it is replaced after three years.
A4: These are meant only for restraining and are used in work at levels where the chances of falling are very minimal.
A5: Mild soaps and cold water should be used when washing.
