All categories
Featured selections
Trade Assurance
Buyer Central
Help Center
Get the app
Become a supplier
(7848 products available)
Ready to ShipProfessional 10 full range loudspeakers are available in a variety of configurations. Each is designed to meet different acoustic requirements and performance applications.
Some of these include:
Single cone
A single cone 10 full range loudspeaker uses one electromagnetic driver to produce sound across various frequencies. As such, this type is straightforward in construction with a simple driver system and provides a basic but broad sound.
Full range with whizzer cone
A full range speaker with a whizzer cone adds a small secondary cone (the whizzer cone) attached to the main cone. This helps cover higher frequencies while allowing the primary cone to focus on lower to mid-range frequencies. Consequently, users get an extended frequency response in a compact design.
Multiple voice coils
These loudspeakers have more than 1 voice coil. Each of these voice coils is meant to drive different parts of the speaker cone. This allows them to handle multiple frequencies simultaneously and provide a more complete sound.
Neodymium magnet
Full range speakers that have a neodymium magnet are normally lightweight but provide strong magnetic fields. This means that the speaker can deliver high efficiency and great sound without the need for a huge and heavy magnet. These types are thus especially useful when portability and power are key concerns.
Diffraction horn loaded
These speakers use horn loading to enhance the efficiency and control the dispersion of the sound. This form of construction reduces diffraction which may cause sound to be uneven in space, thereby creating a strong and focused audio output. Users will therefore enjoy improved projection and clarity with minimal interference.
These loudspeakers usually play a key role in many commercial settings. Some of these places include:
Theatres and auditoriums
In theatres and auditoriums, these loudspeakers are used for acting and musical performances. This is because of their ability to provide clear dialogue and full sound to audiences in various seating configurations. Their wide frequency response means that they can reproduce the human voice and music accurately, enhancing the overall experience.
Live events
Live sound systems for concerts, festivals, and other events use 10 full range loudspeakers. They are capable of handling wide frequencies for vocals and instruments in loud outdoor settings. This means that attendees get quality sound over long distances without needing extra speaker types.
Broadcasting
While radio or television, Broadcasters want to ensure that what they are transmitting is clear and precise. They thus use full range speakers in their studios as it allows them to hear the full spectrum of audio. This ensures that mixing and monitoring are accurate and that the final broadcast quality is premium, with no anomalies or distortions.
Public address systems
Schools, airports, and other venues use PA systems to deliver announcements, alerts, and more. And because these settings often require clarity of speech over large areas, they usually employ full range speakers. They provide the needed clarity and coverage for effective communication in these challenging environments.
Background music systems
Lastly, commercial spaces like restaurants, retail stores, and airports want to have enjoyable background music. They thus use full range speaker systems. Their design allows them to play music at varying volume levels without losing quality, whether at quiet or busy times. This further adds to the ambience without being too obtrusive or hard to understand.
Premium sound quality
Full range speakers come with a specially designed cone that allows them to produce a wide array of frequencies. They therefore enable excellent bass response as well as clear midrange and crisp treble. This results in audio that is well-balanced across the spectrum for different uses, be it music, communication, or reinforcement.
Power handling capabilities
These loudspeakers are designed to withstand significant wattage. As such, users can confidently drive them with professional-grade amplifiers without fear of distortion or damage. Their robust construction includes reinforced cones which handle high power and produces high volume without losing sound integrity.
Commercial applications
Since they are very durable and versatile, these speakers are ideal for professional settings. They can be used in public address systems, sound reinforcement for live events, and background music installations in retail, hospitality, and transportation venues. Their wide frequency response means they eliminate the need for additional subwoofers or satellite speakers in most applications.
Exceptional efficiency
Full-range loudspeakers have high sensitivity ratings. This means they can produce loud sounds with less power input compared to other speaker types. It makes them ideal for battery-operated systems where energy conservation is key, yet they still want to have powerful and quality sound output.
Easy installation
Most full-range loudspeakers come with standard mounting points and lightweight constructions, making their installation easy and accessible. This allows users to quickly deploy these speakers in various environments, be it temporarily for events or permanently in commercial spaces.
Mounting and positioning
Full range loudspeakers should be mounted at least 1.5m off the ground for best sound dispersion. This allows the sound to project over the audience or listening area. Also, the speakers should be angled slightly down to maintain clarity and impact in the targeted space.
Connection to audio sources
Use quality speaker wire to connect the loudspeakers to an audio receiver, amplifier, or mixing console. Make sure to match positive and negative terminals on each end to maintain correct phase and balanced sound.
Power adjustments
Set the amplifier to match the speaker's power rating so as to prevent damage from overpowering or underpowering the speaker. Start with low volume and gradually increase to desired levels. It allows users to avoid distortion while achieving optimal loudness.
Audio tuning
Adjust the equalizer settings on the audio source device to accommodate various audio types. For example, decrease bass frequencies if the speaker is used for announcements so the voice comes through clearly. Conversely, boost lower bass sounds when playing music at an entertainment venue.
Routine inspection
Frequently check for any visible wear and tear, such as cracks in the cone or damage to the suspension. One should also assess the mounting hardware and cables to ensure stable and secure placements.
Cleaning
Regularly dust the loudspeakers using a soft, dry cloth or a brush to prevent debris from accumulating. This is especially important for the grille as buildup can affect sound quality. For models without grilles, one should avoid using liquid cleaners that may damage speaker components.
Moisture and humidity control
If used outdoors or in a high-humidity area, create a moisture barrier around the speaker. This can be achieved by using waterproof covers or enclosures. Further, using corrosion-resistant materials will prevent internal damage from damp conditions.
Re-doping the suspension
If users notice a decrease in sound quality or any vibrations, it may be due to age insuspension problems. They can check the manufacturer’s guidelines to see if re-doping or replacing the suspension is required.
LED light strips
Wrapping the speaker enclosures with LED light strips is a simple method to create a spectacular effect. These strips come with a self-adhesive back which makes applying them a straightforward process. The strips can be placed around the edges of the loudspeakers to generate an exciting glowing outline that heightens the electrical feel of the sound system, especially in evening venues or parties.
Remote-controlled RGB kits
Using remote-controlled RGB kits allows users to adjust the colours on the loudspeakers without having to get off their seats. These speaker systems can be set up to change colours in relation to music rhythm or even for different moods or themes. This gives a dynamically visual and interactive component that complements the audio experience and entertains the guests.
Neon LED accents
For a more retro yet trendy approach, LED neon accents can be integrated around the loudspeakers. These neon lights can be fashioned into fun shapes or patterns, such as circles or waves. It gives the equipment an eye-catching look and the speakers a stylish decorative element that stands out and attracts attention in every space.
LED panel installation
Another decoration idea involves mounting thin LED panels behind or around the loudspeakers. These panels can radiate different shades or showcase patterns, from sleek and modest to lively and busy. When placed properly, these panels will make the loudspeakers appear as stunning lighting fixtures beyond just sound devices, creating a visually stunning setup for both residential and commercial spaces.
A1: Full range speakers reproduce sounds across the entire audio spectrum. Users thus get clear lows, mids, and highs without needing multiple speaker types. This also makes them efficient, as they generate sound well with less power, particularly for bass notes.
A2: These speakers are commonly used for live event sound reinforcement, public address systems, and commercial background music. They handle diverse audio types, from spoken word to music, in theatres, clubs, retail spaces, and more. Their ability to project clearly in these dynamic environments makes them essential for effective audio output.
A3: A loudspeaker of the full range has a single driver cone. This is meant to produce all the sound frequencies in the audio spectrum. Some may also have additional smaller cones attached to the main cone to cover higher frequencies. One can also check the product description for frequency response.
A4: They can be placed properly mounted about 1.5m off the ground and angled to face the audience area. The amplifier power should match the speaker's ratings, and the audio source equalizer should be adjusted to suit the audio type to enhance sound quality. Furthermore, the speaker cables should be strong and should have quality connections to reduce sound loss and interference.
