Loncin 165f tamping rammer

Types of Loncin 165F Tamping Rammer

The Loncin 165F Tamping Rammer offers reliable performance in the construction industry. Several types of rammers are available for use with the Loncin 165F engine.

• Foot Tamping Rammer

  A foot tamping rammer, also called a base or pad compactor, is a machine that is flat and wide to a medium-sized foot or feet. It is attached to a vertical shaft that is then connected to a handle. The constitution of this machine allows the base to be put on a material to be compacted, and then the rammer is lifted so it does not apply any pressure. The machine usually comes with a reliable gasoline engine that can power the tamping function.

• Backpack Tamping Rammer

  Also known as a belt rammer, this machine is used for similar purposes as the foot tamping rammer. The difference is that the operator can wear it like a backpack due to the lightweight construction and the straps on the sides. It is ideal for use in confined areas where the height of the voids needs to be reduced, and other types of compactors cannot be used. Due to the hands-free usage of the machine, a lot of time and efficiency can be saved when using a belt rammer.

• Gasoline Tamping Rammer

  This is a kind of tamping rammer that is powered by gasoline. The Loncin 165F tamping rammer, for example, is powered by gasoline, constituting a fuel made from crude oil processed into gas used to run the machine. The rubber foot of the machine is then dropped onto the ground of the site, and the tamping rammer is moved from side to side to compact the area.

• Pneumatic Tamping Rammer

  A pneumatic tamping rammer uses compressed air from an external source. It can be applied using the hand or by using a machine to hold it in place. The air pressure drives the piston up and down, creating the impact needed to compact the soil. It is ideal for use in areas where vibratory compactors cannot be used, like fragile soils or close to other structures.

Specifications and maintenance of Loncin 165F tamping rammers

Different manufacturers provide varying specifications of the Loncin 165F tamping rammer to meet diverse market needs. Here are some standard key specifications:

• Product Model: The product model of the tamping rammer is LC-42.
• Weight: The overall weight of the Loncin 165F rammer is 65kg. Its heavy weight enables it to exert greater force on the ground.
• Height: The Loncin 165F has a stator base height of 600mm. The ideal factor for working in confined and restricted areas is a compact size.
• Pac khe hãnh xi măng: The operating plate (or foot) of the Loncin 165F rammer is 400 x 280mm. The size of the plate enables it to perform tasks in inconvenient and restricted situations more efficiently.
• Operating Frequency: This Loncin model operates at a frequency between 60 and 70Hz. The frequency indicates the number of blows or impacts the rammer delivers per second.
• Operating Capacity: The Loncin tamping rammers work effectively in soil with densities of up to 2, 5 tons/m³. Higher density may affect the performance and efficiency of the equipment.
• Working air pressure: The working air pressure the Loncin tamping rammer operates on is about 12-14kg. Using the recommended air pressure ensures optimal performance and prevents damage to the equipment.

To enhance the durability and effective working of the Loncin 165F tamping rammer, it is crucial to observe a maintenance schedule. Some essential maintenance practices include:

• Cleaning: After every usage, thoroughly clean the entire tamper. Make sure no dirt or debris remains in the engine area. Remove caked-up earthly materials from the working platform using a scraper or a brush.
• Weekly water cooling system check: See whether the water pump is changing, whether the fan belt tension is at the right level, and whether there is any fine sand leakage in the radiator.
• Lubrication: Lubricate the moving parts of the rammer periodically. This includes crankshaft seals, valves, and slide guide oils.
• Inspect hoses and air pipes: Check hoses and air pipes for any issues such as cracks, air leakage, or looseness. Make the necessary repairs or adjustments as needed.

Application scenarios of Loncin 165F tamping rammers

The Loncin 165F tamping rammer is a versatile equipment used to compact loose and soft soil into stable and hard soil. It is a very important equipment used in different construction projects. Some of the most common and typical usage scenarios of a Loncin 165F tamping rammer include the following:

• Foundations of buildings: The tamping rammer is used to ram the soil when a foundation of a building is to be constructed. This ensures that the foundation of the building in the soil is stable and prevents it from collapsing after some time due to ramming the soil poorly with the help of the tamping rammer.
• Utility trenches: Also, the tamping rammer can be used to compact and fill the soil in utility trenches. The soil can be rammed on loose soil or badly loosened soil after digging for utility lines such as telephone lines, electricity, or even water lines.
• Backfill zones: The loncin tamping rammer can also be used to secure soil and compaction in areas after excavation and digging have taken place. When there is also the need for soil stability in construction projects, the loncin tamping rammer is the best choice.
• Asphalt patches: An asphalt patch can sink or settle after some time if proper soil compaction is not done. Thus, a Loncin tamping rammer can be used to compact the soil beneath the asphalt to prevent it from cracking and sinking once it is laid.
• Fills: A tamping rammer can be used to properly compact and fill loose soil when elevation is required in a certain area in a construction project.
• Decks and docks: Decks and docks also require proper compaction of soil underneath them to prevent further settlement and complicate issues in the future. Hence, a loncin 165F tamping rammer can be used to suitably ram the soil and make it stable before building the deck or dock on the top of it.

How to Choose Loncin 165F Tamping Rammer

For informed buying, business buyers need to consider some features before purchasing a Loncin 165F tamping rammer.

• Power: Check the power output of the engine and evaluate its suitability for the intended compaction tasks. Consider the soil types and densities that need to be tackled, ensuring the chosen power level will deliver the desired performance.
• Height and Weight: Consider the impact of the tamping rammer's weight on maneuverability and ease of operation. A balanced machine can improve productivity and reduce operator fatigue. Ensure the tamping rammer is heavy enough to achieve compaction but not so heavy that it becomes unwieldy.
• Oil Capacity: Evaluate the oil reservoir capacity to determine the frequency of oil changes and the potential maintenance requirements. A larger oil capacity may reduce downtime but ensure it is properly maintained to avoid any engine-related issues.
• Operating cost: Consider the operating costs associated with fuel consumption, maintenance, and potential repair expenses over the equipment's lifespan. Loncin tamping rammer's efficiency and durability can help minimize operating costs in the long run.
• Clone parts availability: Research the availability of replacement parts for the specific model being considered. Choosing a Loncin tamping rammer with readily accessible clone parts can simplify repairs and reduce equipment downtime.
• Comfort and Safety: Evaluate the comfort features of the tamping rammer, such as vibration dampening and handle ergonomics. Loncin 165F with effective vibration reduction can help prevent operator fatigue during prolonged use. Additionally, prioritize safety by considering the presence of protective covers and other safety mechanisms.

Q&A

Q: What is a loncin 165f rammer used for?

A; A loncin 165f rammer is used for compaction of loose materials such as gravel, asphalt, sand and soil to create a stable foundation for roads, trenches and other excavations.

Q: How long does a tamping rammer battery last?

A: The loncin tamping rammer's battery life is approximately 2 hours in continuous usage.

Q: How long does a loncin rammer work done for 1 hour?

A: The loncin tamping rammer can complete 1hour of work and ram soil approximately 2000 square feet in an hour.

Q: Is the tamping rammer difficult to operate?

A: Operating a tamping rammer is not difficult; it is self-propelled and guided manually as it rides back and forth during compaction.

Q: What is the weight of a loncin tamping rammer

A: The weight of the loncin tamping rammer varies with the model but usually weighs between 600 to 700 pounds.