All categories
Featured selections
Trade Assurance
Buyer Central
Help Center
Get the app
Become a supplier
(74 products available)
Ready to Ship
The lithium ion 4s8p comprises different battery types, often distinguished by the chemistry of the individual cells. Each cell has unique energy density, discharge rate, lifespan, and other characteristics. Here are the most common lithium-ion battery types suitable for a 4s8p configuration:
Lithium Cobalt Oxide (LCO)
Lithium cobalt oxide is mainly used in portable electronics and is known for its excellent stability and high energy density. This battery can be ideal for applications where space is critical and energy requirements are high. However, owing to its high cost and lower thermal stability, it is not suitable for large-scale applications or in situations where overheating may occur.
Lithium Iron Phosphate (LiFePO4)
The lithium iron phosphate battery is known for its safety, thermal stability, and long cycle life. While its energy density is lower than other lithium-ion forms, the high discharge rates make it well-suited for applications requiring quick energy bursts or high power. Normally, lithium iron phosphate batteries are used in electric vehicles, industrial applications, and energy storage systems.
Lithium Manganese Oxide (LMO)
LMO batteries are recognized for their thermal stability and middle-range energy density. The batteries have a unique structure that enables high current discharge, making them appropriate for power-hungry applications. In addition, lithium manganese oxide batteries are used in power tools, medical devices, and in some configurations of electric vehicles. In these places, safety and the ability to deliver large amounts of power are very important.
Lithium Nickel Manganese Cobalt Oxide (NMC)
The NMC battery mixes the advantages of high energy density, power density, and thermal stability. Due to the versatility of these batteries, they can be tailored to specific requirements by adjusting the nickel, manganese, and cobalt ratios. This configuration applies to electric vehicles, portable devices, and large-scale energy storage systems because of the good compromise in performance, cost, and safety.
Lithium Nickel Cobalt Aluminum Oxide (NCA)
As a high-density energy configuration, the NCA battery is recognized for its long cycle life but with a disadvantage of being expensive. The use of NCA batteries apply more in commercial applications and electric vehicles, where energy density is much more important than cost. Furthermore, the addition of aluminum improves stability, reducing the risks associated with other high-density variants.
The 4s8p lithium ion configuration is commonly employed in commercial sectors, especially where high energy capacity is critical and needs a stable and reliable battery system. Some of these uses are discussed below:
Electric Vehicles (EVs)
The most popular application of the 4s8p configuration in lithium-ion batteries is electric vehicles. Due to the increased number of parallel cells, this configuration can yield a higher energy capacity, thereby providing larger distances. Thus, energy efficiency makes it possible for batteries to power vehicle systems for a long period while maintaining safeness and efficacy. Also, the high energy density is effective in decreasing charging times and enhancing overall vehicle performance.
Renewable Energy Storage Systems
As for the systems created to store solar or wind-generated energy, the lithium-ion battery 4s8p configuration is a popular choice. These systems store energy during peak production periods for later use, such as during demand times when energy consumption is high. The rechargeable nature of lithium-ion and its great capacity make it ideal for home, commercial, and industrial energy storage solutions to provide uninterrupted power supply, enhance energy reliability, and decrease dependence on the grid.
Uninterruptible Power Supplies (UPS)
The 4s8p configuration lithium ion battery is frequently used to UPS systems that back up power to critical infrastructure. In areas or institutions where power interruption may cause significant issues, such as data centers, hospitals, and telecommunications facilities, this configuration gives a longer backup time and a stable output. As a result, lithium-ion's reliability and quick response time help to ensure continuous operation during outages.
Portable Power Tools
Further, portable power tools, such as drills and saws, employ this battery configuration. This makes it possible for the tools to provide sufficient power and a reasonable work span. Users benefit from the cordless operation's convenience and efficiency, enabling construction and repair work to be done without being tied down to power outlets. Furthermore, lithium-ion batteries have less charging time and a longer battery lifespan than other rechargeable batteries.
Medical Devices
Finally, in the healthcare field, medical devices like infusion pumps, portable diagnostic equipment, and monitoring systems use the 4s8p lithium-ion configuration. Since these devices must be mobile and dependable, lithium-ion batteries provide the required energy capacity and quick recharging. This enables medical personnel to move around with their tools for efficient patient care.
The 4s8p lithium-ion configuration is well known for certain features and specifications. Note that this applies to certain commonly used lithium-ion chemistries; battery characteristics may differ depending on the specific application or customization. Below are product features and specifications of lithium-ion 4s8p:
Battery Capacity
Usually, the capacity of a lithium-ion battery is determined by the number of cells arranged in series and how many are in parallel. With this, a 4s8p configuration draws capacity from each parallel cell, multiplying it by eight, and voltage from the series cells, multiplying it by four. Generally, this offers high capacity voltages to a user with over 30000 mAh or 30 mAh, depending on cell chemistry, which is great for demanding applications like energy storage or electric vehicles.
Energy Density
Often, the 4s8p configuration energy density is Lithium-ion-chemistry-dependent. Particularly, volumetric energy densities can range up to 700 Wh/L. Besides, energy density is crucial since it determines how much energy is stored in a battery per unit volume. Therefore, the higher the energy density, the more energy a device will store, thus making it lighter and more compact.
Discharge Rate
Also known as, the configuration's high discharge rate is achieved by the increased number of parallel cells, specifically by up to 20C. This indicates that the battery can release high amounts of current quickly without harming its overall structure. Consequently, higher discharge rates are especially vital for power-hungry applications like power tools and electric vehicles that require quick bursts of energy.
Cycle Life
Increasingly important parameter is cycle life, usually defined by how many charge/discharge cycles a lithium-ion battery 4s8p configuration can undergo before its capacity decreases significantly. This is particularly true for many lithium-ion chemistries used in this configuration, such as lithium nickel manganese cobalt oxide (NMC) and lithium iron phosphate (LiFePO4), which can have cycle lives of about 2000-5000 cycles. Thus, long cycle life ensures these batteries require less upkeep, offering lower total costs and more extended service for users.
Charging Time
Since the configuration has many cells in parallel, fast charging is possible with this setup. In particular, it usually takes between 1 to 4 hours to achieve full charging, depending on the chemistry used and the charging method employed. Nonetheless, the improved charging speed lowers downtime for consumers needing their devices or vehicles frequently.
Temperature Range
Mostly, this configuration can operate in a wide range of temperatures. This ranges from -20°C to 60°C with good performance. However, the actual range primarily depends on the specific lithium-ion chemistry used. Nonetheless, a good thermal range guarantees that the batteries can perform well under different environmental settings, especially in electric vehicles that may experience extreme weather conditions.
To select a suitable lithium-ion battery in a 4s8p configuration for customers, several factors need to be considered. Some of these factors include:
Application requirements
What the battery will be used for is a major factor to consider when selecting a lithium-ion battery. For instance, electric vehicles need high energy densities, while portable gadgets just need moderate densities. To fulfil the requirements of energy and power for these applications, different lithium-ion chemistries will be applied.
Energy density vs. power density
These two parameters must be balanced to avoid underperformance. Power density denotes how quickly or instantaneously the battery can release energy, while energy density refers to the overall capacity that the battery can store. Lithium cobalt oxide offers very high energy density, while lithium iron phosphate has high power density due to its low energy density. Depending on system requirements, choose a chemistry that optimally balances these two properties.
Cost and availability
In most cases, selecting the right battery chemistry depends on how much the constituents can be accessed and how much they cost. In general, lithium iron phosphate batteries are considered cheaper because of their constituent materials than nickel-cobalt-manganese and lithium cobalt oxide batteries. One of the reasons is that LiFePO4 is used more often in applications like energy storage systems and electric buses, where cost-effectiveness is extremely critical. Indeed, LCO and NMC batteries are applied in high-end gadgets and vehicles because these batteries have better performance parameters.
Safety concerns
Safety is paramount in certain industries, especially in transportation and healthcare. Basically, lithium iron phosphate batteries have better thermal stability and less risk of overheating than LCO and NMC batteries. Thus, industries where security concerns are more critical tend to prefer LiFePO4 batteries.
Environmental impact
As for environmental influence, lithium iron phosphate may be more advantageous since its materials are less dangerous and more recyclable than cobalt and nickel. Therefore, industries focused on sustainability will probably choose LiFePO4 to promote green policies.
A. Lithium nickel manganese cobalt oxide (NMC) batteries have a well-known characteristic of having a better energy density, power density, and thermal stability than other lithium-ion battery formulations. Therefore, these features make them very workable for various applications, including electric vehicles and renewable energy storage systems.
A. The configuration's advantages include higher energy density, power output, and longer battery life. In fact, each parallel cell's energy capacity is added when eight cells are put in parallel, and by putting four series cells together, voltage is increased. Therefore, this means more power and longer usage time in one full charge.
A. Extreme cold or hot temperatures potentially affect the electrochemical reactions inside the battery. Sometimes, performance can be diminished, and battery lifespan may be reduced when operating outside the optimal temperature range of 20-40°C. Therefore, temperature control is vital for sustaining effectiveness and longevity.
