All categories
Featured selections
Trade Assurance
Buyer Central
Help Center
Get the app
Become a supplier
(23165 products available)
Ready to Ship
Ready to Ship
Ready to ShipInfrared red light therapy is a treatment that uses low wavelengths of light to penetrate the skin. There are different kinds of infrared light therapy, each with its unique traits.
Handheld infrared light therapy device
One can hold a handheld infrared light therapy device in one's hand. As the name implies, it is portable and easy to use. Users will find it easy to treat specific body areas with this device. It is suitable for personal and professional use. The infrared light therapy device works by emitting light into the skin. This device penetrates deep into the tissue to promote healing. It is also used to relieve pain, reduce inflammation, and stimulate cell repair. The handheld device comes with different light wavelengths, ranging from 600 to 1000 nm. Many manufacturers make this device with rechargeable batteries for convenience.
Infrared light therapy face masks
This infrared therapy device has the shape and design of a face mask. Users wear the mask over their faces. It has openings for the eyes, nose, and mouth. The light-emitting diodes (LEDs) are inside the mask. These LEDs emit lights of varying wavelengths. Users plug the mask into a power source or use a handheld controller. When wearing the mask, users receive red light therapy on various facial areas. It treats skin conditions like acne, wrinkles, and fine lines. Some mask models have infrared wavelengths that penetrate deeper into the skin. The mask offers a hands-free red light therapy treatment. Users can relax and read or perform other activities while wearing the mask. Infrared light therapy face masks are available in single and multi-use types.
Infrared light therapy panels
This is a flat device that emits infrared light from its surface. Users mount or hang the therapy panel on the wall. It has a large surface area that people stand or sit in front of to receive the light. The infrared light penetrates the skin to promote healing. Therapy panels come in different sizes and designs. Some are portable and easy to move around. The therapy panels have different light wavelengths, ranging from 600 to 1000 nm. This panel is commonly used in residential and commercial settings.
Infrared light therapy beds
This therapy resembles a regular bed with a flat surface. Users lie on the infrared therapy bed like a standard sleeping bed. It emits infrared light from the panels above and below the bed. The light penetrates the body to reduce pain, stress, and muscle tension. People in spas and wellness centers commonly use the infrared therapy bed. It is ideal for treating the entire body.
Infrared saunas
Infrared saunas use infrared light to provide heat therapy. This light penetrates the skin to relieve pain and muscle tension. Users sit or stand inside the sauna. It has wooden benches and emits infrared light from different panels. This sauna is beneficial for individuals who want to improve their general well-being.
Choosing an infrared red light therapy device can be overwhelming with so many options. Here are some key factors to help buyers make the right choice.
Wavelengths
The wavelengths of red light affect the results. Devices that emit lights between 600 and 1,100 nanometers provide many health benefits. The lights at 600 to 700 nanometers increase skin collagen. It is a good choice for those who want to reduce wrinkles. The lights at 700 to 800 nanometers penetrate deeper into the body. It helps to relieve muscle pain, improve the immune system, and promote blood circulation.
Device types and sizes
There are different types of infrared red light therapy devices. They include panels, handheld devices, face masks, wraps, and blankets. Each device has a unique size. Consider devices that are easy to use and carry. Also, think about the treatment areas and how the device will be used. For example, a panel therapy device works best for people who want to treat large areas of the body.
Device features
Various devices come with unique features that improve functionality. This includes adjustable intensity levels, timers, and battery power. Some devices have additional features like red light and laser therapy combined and the ability to bend.
Brand reputation and reviews
Consider the brand reputation of the device manufacturer. A good manufacturer has a history of making quality infrared red light therapy devices. Check the reviews to see the experience of other users. The reviews can provide information on the device's quality, customer service, and delivery speed.
Quality and certification
Look for devices made with quality materials that can withstand long-term use. It is also important to check the certifications. They show that the device meets the required standards and is safe for use.
Customer support and warranty
A manufacturer with excellent customer support can be reached easily in case of any issue with the device. Check the warranty period. It shows the manufacturer's confidence in the product.
Red light therapy (RLT) is a skin treatment that uses infrared light to improve healing and reduce inflammation. Infrared red light therapy is a non-invasive treatment that can be done at home using handheld devices or visiting a professional who uses advanced devices. The therapy is mostly done on the face and exposed parts of the body.
Using RLT devices
When using RLT devices at home, it's important to follow the manufacturer's instructions. The general process is as follows:
Prepare the skin by cleaning it to remove oil, dirt, and makeup. For maximum light penetration, dry the skin completely. If using light therapy gel, apply a thin layer to the skin.
Turn on the RLT device and select the desired settings. The device should be held close to the target area (within 1-15 inches) and moved slowly so that the light can reach the skin pores.
Do not use protective eyewear because it's important for the eyes to absorb the light. However, harsh red or bright blue light should not be directed at them. Use the device for the recommended duration, which is usually between 5-15 minutes depending on the device.
Visiting a professional
When visiting a professional for red light therapy treatment, one won't have to worry about using the devices at home. The professional will handle everything, including scheduling appointments, which usually take 15-20 minutes. RLT sessions will be attended two to three times a week until the desired goals are achieved.
Red light therapy is generally considered safe when used as directed. The skin may feel warm when exposed to red light, but it won't be painful. Infrared red light therapy has no known side effects, but some users report temporary effects such as skin tightness, tiredness, and headaches. These effects disappear after a short time.
The light emitted from RLT devices can be damaging to eyes if exposed for a long time. Eye protection should be worn during the session. However, it's not mandatory for some devices and models.
The main function of red and near-infrared light therapy is to emit wavelengths of light that the body absorbs through the skin. The lights penetrate deep into the body and stimulate the cells to heal, rejuvenate, and regenerate. The therapy helps to treat various conditions, including skin issues, muscle pain, and inflammation. It can be used for general wellness and cosmetic purposes.
Therapy devices come in different designs, including handheld, laser, light panels, and LED face masks. They are portable and easy to use at home or a professional clinic. The device's casing is made of durable plastic or metal. It has lights made of medical-grade silicone, LED bulbs, and infrared technology.
These devices are designed to emit the right wavelengths of light (red light at 600-650nm and near-infrared at 800-1000nm). They also have adjustable settings that allow users to change the intensity and treatment time. Some devices are operated using batteries, while others need to be plugged into a power source.
Q1. What are the side effects of red light therapy?
A1. The side effects of red light therapy are minimal and rare. Some users may experience temporary redness, skin sensitivity, or mild discomfort at the treatment site. These effects usually resolve quickly and are generally well-tolerated. It is important to follow recommended guidelines and consult a healthcare professional if any persistent or concerning symptoms arise.
Q2. How long does it take to see results from red light therapy?
A2. The timeframe for seeing results from red light therapy can vary depending on factors such as the skin condition being treated, the therapy's frequency and duration, and individual response. Some people may notice improvement within a few sessions, while others may require longer treatment over several weeks or months to achieve desired results. Consistent and regular use of red light therapy is often necessary to achieve optimal benefits.
Q3. What should be worn during red light therapy?
A3. During red light therapy, users should wear protective eyewear to safeguard their eyes from the bright lights. It is also advisable not to wear any lotions, creams, or makeup at the treatment site, as this can interfere with the therapy's effectiveness. The therapy device's direct contact and unblocked skin will yield better results.
Q4. Who should not use red light therapy?
A4. Individuals with specific conditions, such as those undergoing treatment for cancer, have a history of seizures, or have light-sensitive diseases like lupus, should consult a healthcare professional before using red light therapy. It may be contraindicated for those with these conditions due to potential risks or lack of safety evidence.
Q5. Is red light therapy safe for long-term use?
A5. There are no specific guidelines regarding the long-term use of red light therapy. However, it is generally considered safe when used as directed. There are no restrictions on using red light therapy daily or several times a day, as long as the duration of each session is within a reasonable timeframe.
