All categories
Featured selections
Trade Assurance
Buyer Central
Help Center
Get the app
Become a supplier
(118 products available)
Manual gyno operation table
A manual gyno operation table is a type of table whose movement, adjustment, and operation involve using the hands and legs rather than any electric system. Manual gyno chairs incorporate various features that enhance their use in gyno examination and operations. The patient's position is changed by latches or handles with levers on the sides or underneath. Their design makes them simple to operate, and most of them incorporate foot pedals or hand levers for adjustment. This makes them quite useful in areas where electric supply is inaccessible, especially for medical facilities.
Hydraulic gyno operation table
Hydraulic gyno operation tables have dampers and levers operated by pressurized fluid that enhance flexibility and stability. The hydraulic mechanism enables easy adjustments of the table for the patient, boosting the doctor's performance. It is normal for busy health facilities to use these tables, which function flawlessly while in use for many hours. The hydraulic system can lift and lower the table's different parts, including the seat, backrest, and leg sections. As they can support heavy uses, these tables are popular in numerous healthcare facilities.
Electric gyno operation table
These electric gyno operation tables are fitted with electric motors molded into the table to allow various movements and adjustments. These systems permit easy adjustments of positions, tilt angling, and height using a remote control or a switch. Electric tables are predominantly featured in advanced health facilities as they relieve the medical crew during complicated operations by ensuring precise adjustments at the small scales. The electric table is more favorable with patients because moving patients is avoided; instead, special attention is given to the mechanical table.
Combination gyno operation table
A combination gyno operation table is a piece of equipment that performs the functions of a gyno table and an examination table simultaneously, eliminating the need to install two separate tables. It can be used for different procedures, including delivery and operations, by changing the configurations, which be helpful for medical facilities that need to provide a wide range of treatments with limited resources. These tables are useful in obstetrics, as they are purposely designed for delivery and imaging examinations.
Some considerations are given when selecting a Gynaecology table for furnishing a health facility. Some of the elements to consider are the kind of procedure that is likely to be done, the location of the health facility, the number of patients to be treated, and the kind of equipment that may need to be used.
Functionality and versatility
Those facilities providing different treatments and procedures would require versatile operation tables for Gynaecology. It is also important to consider whether a configuration can be achieved in the table to facilitate different operations, examinations, and deliveries. It would be reasonable to opt for a table with auxiliary features such as a height adjustment, tilting, a clamping device, or leg supports, as these are important during treatment.
Load capacity and table strength
The load capacity of the Gynaecology table must be appropriate so that it can safely accommodate all patients. This is a particularly important factor in a health facility where there is a wide margin between minimum and maximum table size. Checking the materials and construction of the table is important as they influence durability and stability. A strong, durable table should be placed strategically in operation theatres or areas in health facilities that are normally occupied.
Ease of use
Doctors conducting Gynaecological operations require convenience when operating an operation table. Manual tables may be useful because their adjustments could easily be operated by hands or by foot, while electric tables may require some time to operate; however, they could be operated at minimal effort. If the table is fitted with remote controls, the controls should be easily accessible and understandable from the practice area with no additional mobility. Additionally, selecting a table with fewer elements made of easy-clean materials will also assist in minimizing the time required for cleaning after use.
Space and design considerations
Know the dimensions of the room where the gyno operation table will be placed. If a small space does not allow for a large machine, it is worth considering a compact one. In designing the operation tables for Gynaecology, the aesthetics and compatibility with the other furniture in the operation room are ideal. The operation table should be well placed regarding its location, such as in the operation theatre or the consultation room.
Budget and warranty
Targets should be set when purchasing an equipment table, such as an electric or manual one, depending on the investment. While it is sometimes necessary to make budgetary concessions, the quality should not be sacrificed, as a well-furnished operation table will always lead to improved patient safety and outcome. Check on the types of warranty protection afforded to the manufacturers as this would increase the trust of the buyer when marketing the product.
Specialized design for gynecological procedures
Operation tables for Gynaecology have been specially designed with additional features for the facilitation of women's health treatments. It can be adjusted in height, angle, and backrest, enabling the doctor to easily position the patient for difficult operations. This design feature promotes comfort and safety and ensures good working arrangements for the surgeon.
Improved patient comfort
Optimum comfort for patients is assured on Gynaecology tables, given the numerous adjustments available, which help accommodate different body shapes and sizes. Comfort plays a significant role in the reduction of anxiety in patients, especially those facing operative procedures. Special cushions are used to provide additional warmth and minimize discomfort. Comforts and safety are assured, and patients can easily get in and out.
Enhanced surgical efficiency
The provided specifications on the Gynaecology table enable the surgical team to operate smoothly. Quick adjustments, electric or manual, allow for swift positions that may be required throughout the procedure without the need for additional time and effort. The efficiency of the surgery will be affected positively by proper positioning of the patient, precision, and assurance of good accessibility to the organs and systems for the surgeon.
Radiolucent options for imaging
Most gyno operation tables are radiolucent or opaque to X-ray and other imaging processes. This means that the table will not obstruct the diagnostic imaging procedures needed for the patient during the examination. These tables are extremely helpful for hospitals or clinics that often use images for diagnosis or treatment. Their low radiographic density makes them useful for imaging procedures.
Versatility in obstetrics and gynecology
Many operation tables for Gynaecology can also be used for obstetric procedures, such as delivery and prenatal examinations. This property helps reduce expenses because only one table is required for use in both operations. There is also a great need for versatile tables that have different configurations that can be used for examination, delivery, and surgery.
Weight capacity verification
The first consideration when using a Gynaecological operating table is to check the maximum weight that the table can support. As this is a special consideration in any operation, the non-compliance norm of a medical device has to be checked and assured so that there does not arise any failure in the device that can lead to danger. If the table is overloaded, it may not operate as intended; in extreme cases, it could collapse or break down, injuring the patient.
Stability and locking mechanisms
Following the placement of the patient on the table, one needs to make sure that there is stability in the structure and that the locking mechanisms are in place. Ensure that all wheeled legs or adjusting parts are well locked to reduce the chances of any movement during operation. In case the table moves or vibrates, it may result in accidents or interfere with the surgical procedure.
Proper positioning of patients
The proper patient position is important to ensure the comfort of the patient and the effectiveness of the procedure. The operating team should check that the patient's position is optimal for several procedures and will not create any physical pressure on the patient's body. It is necessary to secure the patient using straps or supports so that during the operation, the patient will not shift from his or her initial position.
Maintenance of hygiene and cleanliness
Cleansing the table before and after use is very important for the prevention of infectious diseases. This involves cleaning all the surfaces and any removable parts that are dirty or contaminated. Healthcare professionals should check that appropriate disinfection protocols are followed in an infectious environment and that all operating instruments and equipment are sterile.
Regular maintenance checks
All the Gynaecological operation tables require several services for the correct functioning of the operations. The engineering team in charge should check all the important parts, such as electric motors or hydraulic components, to ensure they are functioning properly. The manufacturer's information should be available and followed regarding service or repair of the apparatus, because, in case of malfunction during an operation, it could be life-threatening.
Enhanced comfort for patients
Operation tables for Gynaecology improve patient care in health facilities by giving more comfort to patients during complicated procedures. These tables have several adjustable features that facilitate the positioning of patients and the reduction of discomfort during operations. In addition to reducing anxiety that comes with surgery, increased comfort reduces postoperative complications associated with incorrect patient positioning.
Improved Surgical Outcomes
Proper positioning is vital in surgery to enhance its effectiveness and its safeness. Operation tables for Gynaecology are expected to provide ease for the surgical team in their quest for optimal positioning. These tables give better access to the surgical area and limit the need to make uncomfortable movements. Hence, in terms of better outcomes for the mother and the baby after delivery, it impacts directly on the baby's surgery results.
Increased efficiency for healthcare staff
The main functions of the operating tables for Gynaecology are quick adjustments, electric mechanisms, and ease of operation by the hand or foot. These features greatly increase the efficiency of the health staff. This could impact the workflow by reducing the time for positioning and allowing the surgical team to concentrate on the procedure. The burden of manually adjusting the table has been eliminated; therefore, better attention can be given to the treatment of patients.
Greater versatility for procedures
The inability to perform or treat conditions is avoided when using operation tables designed for Gynaecology. These tables can be utilized for diverse treatments, including examinations, surgeries, and childbirth. This versatility is particularly helpful in hospitals with obstetric and gynecological departments, as one table can meet multiple needs.
Advanced technology integration
Modern gyno operation tables provide innovative features such as being radiolucent, meaning there is no interference with diagnostic imaging. These technological improvements in the diagnostic and therapeutic processes aid in enhanced overall performance. Integration of advanced technology in Gynaecology tables signifies the modernization of healthcare and improvement of patients' results.
Yes, combination gyno operation tables are specifically designed to be used for obstetric and gynecological procedures. These kinds of tables have features like trendelenburg and reverse trendelenburg, leg supports, and adjustable heights and angles.
Electric tables offer easy positioning with remote controls, while manual tables require more hands-on adjustments. Electric tables are typically more expensive and can provide more precise movements, while manual tables are often more affordable and reliable.
Tables, both electric and manual, also require periodic maintenance services that involve the cleaning of surfaces and disinfecting of the parts, especially after contamination of the table. Hydraulic and electrical systems require frequent inspection and servicing as indicated by the producer to ensure that there is a sound performance of the table.
Yes, maintaining hygiene is crucial. Always disinfect the table before and after each use, focusing on all surfaces and removable parts. Ensure that the table is sterile, especially in high-risk environments.
Hospitals can improve patient comfort, surgical outcomes, and operational efficiency by investing in a specialized gyno operation table. The advanced features and enhanced ergonomics for both patients and healthcare staff make these tables a valuable addition to any facility.
