All categories
Featured selections
Trade Assurance
Buyer Central
Help Center
Get the app
Become a supplier
(886 products available)
Ready to Ship
Ready to Ship
This drill is used for masonry tasks using a hammer and anvil action. This drill has a cordless design, so users can move freely. It has a 3-speed setting to adjust the power based on the job. An important feature is its 4-position battery gauge, allowing the user to check battery levels easily. The motor offers up to 38,250 MAX BPM for fast drilling in hard materials. The compact design, only 8.6 inches front to back, helps in tight spaces.
This brushless drill is designed to last longer and work better than older models. The brushless motor helps the drill stay cool and last longer by reducing heat and friction. This cordless drill offers 60% more run time than older drills. It provides 450 watts of maximum power input, which boosts energy efficiency. Without brushes, it's more durable and requires less maintenance. This drill is ideal for heavy tasks like constant drilling or driving.
The track saw Dewalt drill provides precise cuts for users in carpentry or cabinetry. Unlike regular saws, it offers straight, accurate cuts using a track system. It features an adjustable bevel for angled cuts up to 45 degrees. The small blade size of 6.5 inches allows narrow cuts. It also has a brushless motor that keeps the saw working smoothly for a long time. The rear saw blade track helps avoid splintering on materials.
The Atomic Dewalt drill is small but still strong for tough tasks. Known for its power, this tool fits tight areas where larger drills can't go. Even with its smaller size, the drill can handle a lot of job site use. The drill is lightweight, making it easy to carry during long or busy jobs. It works well with other tools in the Atomic lineup. Although compact, it gives good speed and torque for many jobs.
In construction, Dewalt drills speed assembly and allow precise fastening and drilling in various materials. This makes them vital for framing, drywall work, and general building. With their power and cordless options, they suit heavy work and enhance task efficiency.
In this industry, Dewalt drills help with assembly, repair, and maintenance tasks. These drills make it easy to drill into metal for part installation or removal. They also aid in precise fastening, needed for complex engine and bodywork tasks.
Electricians use Dewalt drills to create clean holes in drywall and studs for wiring. Cordless models give them the freedom to work without cords, speeding installation. The drills also help with precise fastening, ensuring secure switch and outlet installation.
In heating, ventilation, and air conditioning work, Dewalt drills are used to install and fix systems. They help create holes in ducts and other materials needed to install air conditioning or heating systems. Their power allows them to easily handle tougher tasks like drilling into thick materials.
Dewalt drills are great for homeowners and DIYers working on home projects. They help hang shelves, install doors, and do other tasks around the house. Their ease of use and many attachments make them suitable for various home improvement tasks.
Industrial drills play a key role in mass production in factories. Dewalt drills help with consistent assembly tasks like screwing parts together or drilling holes for part insertion. Their durability ensures they can handle long hours in manufacturing environments.
Cabinet makers and furniture builders rely on Dewalt drills for their precision and power. They help make accurate holes for joints and hardware, improving work quality. Cordless options allow free movement in workshops without getting tangled in cords.
Brushless Motor
The brushless motor is more efficient because it uses electronic controls instead of brushes. This helps the drill give more power and run longer without needing as much battery. Since it creates less heat, the motor lasts many years. This tech also allows the drill to adjust better to loads, keeping it strong even when pushed hard.
Variable Speed Control
Variable speed control allows users to change the drill's speed with a simple switch. This makes it easy to adjust the drill for different tasks, like driving a screw or drilling a hole. Users can also control the speed with their fingers, giving full command. It also helps the drill work longer by adjusting the speed to match the job.
Compact Design
The compact design makes the drill small and light, easy to handle in tight spaces or for long periods. Even though it's small, it still packs a lot of power. The light weight reduces strain on the hands and arms. It's also easy to store in small spots or carry to different jobs.
Max Torque
The max torque tells how much twisting force the drill can make. More torque means the drill can go deeper or faster into harder materials. This model gives strong torque, ideal for heavy jobs. It also has adjustable torque settings, letting users lower the force for fine work or raise it for tough tasks.
Unpack Carefully
Open the box and check all parts against the list to ensure nothing is missing. Take the drill and all bits, batteries, and handles out slowly to avoid damage. Look at the drill and tools to make sure everything is okay before starting the setup.
Insert the Battery
The cordless models use battery power. Slide the battery into the base of the drill until it clicks. This means the drill is now ready to use wirelessly. For corded models, skip this step and move to the next.
Attach the Chuck Key or Hand Chuck
Some drills have a chuck key and some use a hand chuck. If using a drill press or other types, put the chuck key or hand chuck onto the drill's chuck. Loosen the jaws by twisting the chuck key or hand until the drill bit fits inside. Place the bit in the center and tighten the jaws around it firmly.
Pick the Right Speed and Gear Settings
Go through the drill's speed and gear options to get the right one for the task. Set the speed switch, keeping it between 1 and 2 for basic drilling. For driving, turn the switch to the screw icon. The lower torque numbers help in driving screws, while the higher numbers work faster for drilling.
Keep the Drill Clean
Wipe the drill after each use, clearing dust, debris, and grime from the exterior. Regularly check and wipe the chuck, removing bits of old screws and rust that can cause damage. For heavy jobs, clean it often to stop build-up that impacts the drill's performance. Avoid using water; instead, use dry cloths to keep it safe from internal harm.
Check the Battery
Look at the battery each month by cleaning it and checking for cracks or other damage. If the drill starts running slow, it could mean the battery is worn, so consider getting a new one. Use a multimeter to check the charge; if it doesn't hold a charge, it's time for a change. Keep the battery contacts clean by wiping them with a dry cloth to ensure solid connection.
Regular Lubrication
Lubricate the chuck with light oil every few months, which helps it tighten and loosen bits smoothly. Put just a small amount inside the chuck so it doesn't get too messy. Move the jaws to spread the oil, then wipe off any extra that might cause dirt to stick. Lubing the chuck also helps extend its life and keeps it in top shape for when it's needed.
Check the Cords and Attachments
Look at the drill cords and attachments regularly to make sure nothing is broken or worn down. If a cord drill has frayed wires inside it, stop using it right away to prevent fires or shock. Use electrical tape to fix small nicks in cords before further use. Store attachments wisely in a dry place so they won't rust or get damaged from moisture.
Drill Components
In Dewalt drills, things like motors, gears, and chucks are checked often. Using machines to spot cracks or weak areas in the materials helps ensure strength. This keeps the drills from breaking during tough work.
Assembly Accuracy
Workers use tools to measure if parts fit right when putting drills together. Special cameras check that everything lines up well. This makes sure the drills act as one piece and work safely.
Testing Under Load
Samples from each batch are pushed to their limits with stress tests. These drills are used hard to see how they handle tough jobs. Sensors track if any part fails under heavy work, which helps spot weak batches.
Mechanical Testing
To check strength, some drills are put on machines and spun fast to test the gears and other parts. They also drop weights onto drills to see if any piece breaks under hard use. This checks if the drills are strong enough for users.
Heat Checks
Heat testers track if drills stay cool when used a lot. Cameras watch for excessive heating, which may harm parts over time. If any model gets too hot, it receives a label warning customers it may not work for long.
Short Circuits
Safety circuits check for issues like short circuits that may cause fires. They also track voltage to make sure it stays within safe limits during use. This stops problems from harming users.
Noise and Vibration
Special gear measures noise and shaking in drills. If a drill makes too much sound or vibrates too wildly, it receives a check. Excessive vibration can damage tools and hurt workers, so low-level checks are important.
Overheating Alerts
Sensors inside check for overheating, which could harm users. If a drill gets too hot, it automatically shuts off until the motor cools down. Users are warned with flashing lights to take breaks.
Blade and Bit Guarding
Guards and cover checks to ensure pieces don't accidentally touch fingers. Covers also protect if a bit or blade snaps; it won't hurt the user. All drills undergo testing to confirm covers guard well against flying shards.
Battery Protection
Dewalt drills powered by batteries have safety locks that stop sudden power bursts. Sensors check batteries to make sure charging and use no power at the same time. Proper lock stops accidental usage during swapping.
A1: Cordless hammer, brushless, track saw, atomic drills are some that provide quality outcomes. They precisely align with various clientele's needs for performance.
A2: Construction workers depend on Dewalt drills while doing their tasks. Drills assist them with fastening and material manipulation to complete projects efficiently.
A3: Yes, safety measures such as overheating detection, battery locks keep users shielded during drill operation. These decrease chances of harm and provide peace of mind.
A4: Regular tasks like cleaning the outside, checking inside for damage extend the drill's lifespan. Proper maintenance keeps them functioning well for several projects.
A5: Quality tests on parts improve strength, while safety tests ensure secure operation. Together, they make certain drills fulfill requirements and work securely at job sites.
