All categories
Featured selections
Trade Assurance
Buyer Central
Help Center
Get the app
Become a supplier
(772 products available)
A ceramic heater 100V is a heater that utilizes the heat produced by a ceramic element. Manufacturers make these ceramic elements from a combination of clay and other materials and then fire them in a kiln. This process creates a dense and hard substance that can produce heat when an electric current passes through it. They are less energy guzzlers compared to other electrical heaters because they heat up quickly.
Wholesale ceramic heater suppliers can categorize these heaters into two primary types: the fan-forced heater and the space heater. Please see their descriptions below.
Fan-forced heaters
This is a small compact heater that can sit on a countertop, desk, or floor. The ceramic element in the heater generates heat, which a fan blows into the surrounding space. These heaters have various power ratings, with some being as high as 2,000 watts. Higher power ratings mean the heater will warm a space faster. A fan-forced heater can be portable or mounted on a wall. Depending on the design, it can heat an entire room or spaces like a garage. Some manufacturers include a tip-over safety switch in their designs to prevent overheating and accidents.
Ceramic space heater
A ceramic space heater warms a small area or room using heat from the ceramic element and a fan blow. It is more energy efficient than traditional space heaters that use metal coils. The fan that circulates the air can be very noisy, so buyers who are concerned about noise can get a heater with no fan. They are very effective in areas around the feet and hands. The central space heater design is more common. It's a small box (about 12 inches) sitting on the floor. The height of the box may vary from one design to another, but in most cases, it features a control box with buttons & digital screen and radiator-like grills.
Power Supply
Operating Voltage: 100 volts
Heating Element
Material: Ceramic
Design: Multi-channel(usually) or other compact designs
Coated or Uncoated: Some Ceramic heaters have a coating that provides additional insulation and safety, while others are bare.
Fan
Type: Axial or Centrifugal, depending on the design and purpose of the heater.
Power: Fan motors are typically rated in watts. For small heaters, it can be around 3-10 watts; bigger ones might be more.
Speed: Fan speeds are measured in rpm. Depending on the heater model, the fans can run from 1,000 to 5,000 rpm.
Number: Usually, there is one fan. But some big ones can have two, one for intake and the other for exhaust.
Housing and Base
Housing Material: The housing that holds the heater element is made out of cold-rolled steel, die-cast aluminum, stainless steel, or plastic.
Base Material: The base that supports the heater is also made from the same materials as the housing. Weight capacity: small ceramic heater bases can support 1-5 kg; larger ones can be more.
Temperature and Thermal Regulation Systems/Parameter control
Temperature Control: On/off switch or knob to heat regulation.
Safety Features: Overheating, tip-over, and other caution warnings/shut-off mechanisms.
Operating Temperature: Operating temperature is around 200-300°C, depending on the design and purpose of the heater.
Fan Speed
Low Speed: 1,600 rpm; Medium Speed: 2,800 rpm; High Speed: 4,000 rpm (It depends on the actual product specification).
Power and Efficiency
Heating Power: 300-600 watts, depending on the specifications.
Operating Efficiency: High/Medium/Low speed 85%/80%/75%(It depends on the actual product specification).
It’s important to maintain a ceramic fan heater in good condition. Here are some tips to help care for the heater:
Clean Regularly
Users should wipe the heater's exterior with a damp cloth to remove any dirt or dust. Use a soft brush or vacuum cleaner with a brush attachment to clean the air inlet and outlet. This will stop the dust from getting into the fan blade and heating elements. However, refrain from using a wet cloth to clean the device while it's plugged in. Cleaning it like that could cause an electric shock hazard.
Check Cables and Plugs
Users should regularly inspect the power cord and plug of the heater. Look for signs of damage like fraying or cracking. If there’s any visible damage, it’s best to get a qualified person to repair it or replace it with a new one. The user should avoid using it if there’s any visible damage.
Temperature Control
When using the heater, the user should set the temperature to the appropriate level instead of running it full tilt all the time. It’s best to avoid continuous high-temperature operation. This can reduce aging and improve lifespan.
Avoid Moist Environments
The ceramic fan heater shouldn't be used in wet or high-humidity places. Doing so creates the risk of electric shock and damage to the heater. If it must be used in a damp environment, a residual current device (RCD) protection should be used.
Ceramic heaters are frequently used in the following industries:
Indoor heating
Both households and commercial places use ceramic space heaters to provide warmth when the weather is cold. Ceramic heaters are used as the main source of heat or supplementary heating in living rooms, bedrooms, bathrooms, and offices.
Greenhouses and plant nurseries
Ceramic heaters are a useful heating tool for greenhouse cultivation and plant breeding. The heaters can help maintain a temperature beneficial for plant growth when the outdoor temperature is low. This allows ceramic heaters to promote the healthy growth of plants, thereby increasing the greenhouse and nursery's yield and quality.
Industrial production
In some industries, such as food processing, chemical production, and electronics manufacturing, a specific workshop temperature is necessary to ensure product quality and production efficiency. Ceramic heaters can provide reliable heating, ensuring the required temperature for these industries. Besides, ceramic heaters can also be used for equipment and pipelines in industrial workshops that need to be kept warm to avoid freezing and ensure continuous operation.
Outdoor activities
Outdoor heating is often needed for camping, picnics, and other outdoor activities. Portable ceramic heaters can provide warmth for people when participating in outdoor activities in cold weather.
Automotive industry
Automobile manufacturing and maintenance often require precise and specialized heating. Heat plates for auto ceramic heaters can provide the precise temperature required for these processes, ensuring the quality and stability of automotive products. Additionally, automotive ceramic heaters are useful parts for vehicle heating systems. They can quickly heat the air in the car and provide a comfortable riding environment for occupants by preheating the coolant.
Selecting the
When selecting the right ceramic heater 100v for specific needs, it is essential to consider specific features and requirements. To begin with, it is crucial to ascertain whether the desired ceramic heater will be applied for personal use or for public or larger space use. This is important as it would determine the capacity and wattage of the heater to be purchased.
For safety reasons, it is also essential to consider the safety features of the heater, such as tip-over and overheat protection. It would also be ideal to choose a ceramic heater with a cool-to-touch exterior and those with all-rounded protection.
Another important factor to consider is the mobility of the ceramic heater. Assessing the weight of the heater and whether it has handles or cast can influence whether the heater will be portable or not. The noise level of a ceramic heater can differ from one unit to another, with some being remarkably quiet. Although small heater fan sounds are standard, it's essential to choose a heater with a motor that operates quietly.
Additionally, it is also important to consider the control features of the ceramic heater. Some heater models come with digital controls and remotes, while others have manual controls with few heat and fan settings. Consider the control feature that matches a person's desire. It is also important to consider the design of the heater one wishes to purchase. Many ceramic heater manufactures have created different models that buyers can choose from. Some designs are tower shaped for space-saving purposes, while others are petite and designed to be placed on the floor.
Q1: What are the benefits of a ceramic heater?
A1: Ceramic heaters are energy-efficient, providing ample warmth while consuming less energy. They also heat up quickly, offering immediate warmth. Additionally, they are safe, with features that prevent the risk of overheating or fires.
Q2: Can ceramic heaters cause fires?
A2: With proper usage, ceramic heaters should not cause fires. They have safety features to prevent overheating. However, never leave any heater on, including ceramic ones, unattended. Always be cautious and follow safety guidelines.
Q3: How long do ceramic heater socks last?
A3: Ceramic sock heaters can last for several years depending on usage and quality. With frequent use, some may last only a year, while others may last up to five years. It’s important to turn off the heater when not in use to prolong its life span.
Q4: Does a ceramic heater use less electricity?
A4: Yes, ceramic heaters use less electricity compared to other types of heaters. They offer efficient heating, which means users can enjoy more warmth with less energy consumption.
