All categories
Featured selections
Trade Assurance
Buyer Central
Help Center
Get the app
Become a supplier
(12 products available)
Boxwood bushes have dense foliage and a refined shape. They are widely used in manicured gardens and architectural landscapes. Therefore, it is necessary to have the right tools for these bushes. Boxwood bushes shears are one of the must-have tools, especially for landscaping businesses. Such shears maintain the bushes’ natural shape while promoting healthy, new growth.
Buyers can read on to know the different kinds of shear suitable for various cutting needs. Then, they can select the right ones based on purpose.
Manual shears are best suited to cutting small to medium branches up to 0.5 inches thick. This is because they have hand-powered blades that give precise control over the cutting action. However, it can be tiring to use them for long pruning tasks. So, these shears are only good for light pruning or shaping boxwood bushes.
As the name says, the Dutch boxwood shears prune hedges. People prefer them for their wide shearing blades because they help make clean cuts on larger branches. Dutch shears have a strong wooden handle to provide leverage when pruning thick bushes. Therefore, they can stand up to tough boxwood pruning. However, their larger size means they are not as suitable for finely detailed pruning as smaller shears.
Avoid shears are similar to bypass boxwood shears, which have two blades that slide past each other when pruning bushes. These shears are for more delicate pruning and make clean cuts on thin branches. Their design mimics the motion of human fingers pinching. Therefore, these shears are ideal for shaping or trimming small boxwood bushes.
Anvil boxwood shears have a straight lower blade that closes against a flat surface, which is the anvil. These shears work well on thicker branches because the anvil provides support that holds the branch while the sharp upper blade slices through it.
As for electric shears, they are better for large pruning jobs. They are suitable for heavier boxwood shears because they do not tire the user. Electric shears also speed up the pruning process since they cover larger areas quickly.
Buyers need to understand the economic benefits of investing in pruners and shears. This knowledge also helps them grow profitable businesses. So, consider the following reasons about boxwood bushes shears.
Any good landscaping service must have these shears in its toolbox. After all, they help keep bushes neat. Besides, neat bushes always make gardens look attractive. That increasing demand means landscaping companies could earn more money by buying more shears and then renting them out to different people.
People visit garden centers not just to buy plants but also to get tools. When customers who are hobby gardeners or professional gardeners need shears, they will probably get them from a nearby garden center. After all, those shears have a reputation to uphold. So, if local centers sold more shears and pruning kits, more gardeners would visit to buy boxwood shears.
All kinds of people in the horticulture industry use boxwoods. So, the new plants will need more shears and tools. Therefore, buyers can sell more shears and pruning tools to help the market meet its demand for more boxwoods.
Even public parks and the government have some boxwoods in the parks, and the shears are not spared. If the shears were to lose their sharpness or damage, the government would definitely buy some more to maintain the bushes in those parks. Moreover, the shears are used by all the public's boxwood hedges and bushes, including the topiary. So, there is a continuous need to buy shears for pruning activities as grants for maintaining public parks and gardens.
In short, the value of these shears increases as more people use them. The better the shears are, the more people will use boxwood for shrub planting. If more people knew the value of shears, there would be more bush owners who understand the value of pruning.
Considering the above, shears with more customers who understand their value will cost more. When more people know more about the tools, the demand for the tools will increase. The landscapers and farmers will try to buy better tools to attract more customers and increase work productivity. So, one step leads to the other and helps everyone to make healthy and neat boxwoods.
Buyers need to consider the below factors to select the right shears for bush pruning.
Cut type is a major factor because different types of cuts call for different kinds of shears. For example, bypass shears are for young and healthy branches because these shears make clean cuts. It is like how a pair of scissors cuts smoothly through a sheet of paper. Anvil shears are for older branches with thick wood. It is like trying to cut cardboard with a sharp knife. The knife has to press hard to cut through the thick material. That is how anvil shears work too. They smash the branch against the anvil as the upper blade slices through it.
Bush shear blades vary, so buyers should look for ones that suit their needs. Stainless steel blades resist rust, so they are good for damp and wet pruning areas. Carbon steel blades stay sharper longer than other blades. However, carbon steel rusts easily. Therefore, carbon steel blades need more maintenance. Buyers who do not want to spend that much energy after cutting should go for carbon steel blades or for stainless steel blades if they are prone to rust. Coated blades are also available to keep sap and resin from sticking to the blade. Sap and resin can dull even the sharpest blade over time.
The handle is what makes the shears comfortable to use. Since people will prune for a long time, it is best to get handles that feel good in the hand. There are Ergonomic handles, which are designed to fit the hand's natural grip. This reduces fatigue after hours of pruning. If the bushes need a lot of strength when cutting, go for Pivot mid-handle shears. They provide more power since one hand is closer to the blade to push down harder cuts.
With proper care, shear tools last for many seasons. So, buyers should look for low-maintenance features. Tools that resist rust or have coated blades require less upkeep. Shears are also easy to clean. Moreover, if the shears are electric, they are easy to maintain. These types need little more than charging between pruning sessions.
Pruning tools also vary based on the pruning cuts the instrument makes. Some cuts are thin, while others cut thick branches. For example, to make light cuts on young growth, use shears to cut stems close to the main branch. Remove thin branches entirely with loppers to not waste energy making multiple cuts. Electric pruners handle this task effectively too.
Conversely, for thick branches, cut the branch as close to the main stem as possible using saws to allow room for new growth. Never leave large wounds on the main trunk. Instead, prune at an angle to hasten healing.
A1. People can use shears to make cuts on young growth. Use loppers or electric pruners on thick branches.
A2. They should use anvil shears for thick branches.
A3. People do not have to do anything to electric shears apart from charging them. However, manual shears require cleaning and sharpening.
A4. Yes, pruning tools last for many years when kept in good condition.
A5. Stainless steel blades resist rust, so they are good for wet pruning areas.
