All categories
Featured selections
Trade Assurance
Buyer Central
Help Center
Get the app
Become a supplier
(372 products available)
Following is the type of aluminium 7075 screws m3.
Button Head Screws
Features of button head screws are that it has a large, rounded head and a small, hexagonal drive. This feature makes it easy to install with a hex key. Usually, these screws are used in applications where a smooth, low-profile head is needed; this makes them ideal for use in tight spaces. The robust head design ensures that the screw can handle higher torque without stripping. Often, the button head style of screws is widely utilized in the aerospace industry, electronics, and high-end bicycles because of their combination of strength and aesthetic finish.
Countersunk Screws
A 7075 aluminum countersunk screw is known for its conical head which allows it to sit flush within a countersunk hole. This property minimizes any protrusion on the surface maintaining a smooth finish. Often, these screws are applied in aeronautical products and assembly applications where staying needs to be aerodynamically smooth. The screw's flush fit design is exceptional for enhancements that warrant a flat surface to avoid snagging or compromising other components. Further, the strength of 7075 aluminum in a lightweight countersunk design gives a very functional and durable solution.
Cap Head Screws
A 7075 aluminum screw with a cap head is cylindrical and with a hex drive, offering an even torque distribution during installation. This property makes it preferable in stress-prone areas. Since the head is also robust, it can be utilized where regular fastening would wear out. Further, these screws are fitting in precision machinery, automotive applications, and any situation that warranted reliable and durable fasteners. The use of 7075 aluminum means that despite the lightweight, there is extreme resistance to bending or corrosion.
Slotted Screws
Unlike other types, the slotted mechanical screws have a single groove in the head enabling their installation via a flathead screwdriver. Even though it is not as common as other head types due to its lower torque application, it is valuable in certain lightweight and cost-effective insulation projects. In addition, 7075 slotted screws can be applicable in electrical housings or light-duty machinery where corrosion resistance is a more significant consideration than strength. While simple in design, it provides reliable functionality within specific uses.
Hex Head Screws
The 7075 Hex Head screw is a conventional fastener featuring a hexagonal head allowing usage with a wrench or socket for superior torque application. Further, this makes them useful in heavy-duty fields for aerospace and automotive. Also, the unique properties of the 7075 aluminum allow it to have a high strength-to-weight ratio, meaning hex head screws are both strong and easy to carry. In addition, their structured head provides excellent grip during tight applications where slippage is likely. Also, these are appropriate for outdoor uses due to enhanced weather resistance.
Following are features of Aluminium 7075 Screws M3.
Corrosion Resistance
Equipped with outstanding corrosion resistance, the 7075 aluminum m3 screw offers a long-lasting solution in maritime and chemical-intensive environments. The zinc alloying element in the 7075 aluminum creates a protective oxide layer that prevents moisture and other corrosive agents from degrading the metal surface. This feature makes it ideal for outdoor applications and industries such as aerospace and marine. Therefore, users maintain reliability and reduction in expensive repairs or replacements through countersunk screws under adverse environmental conditions.
Lightweight, Yet Sturdy
The prominent feature of 7075 aluminum is the high strength it presents relative to its lightweight. It is specifically designed to build up a high-performance fastener system that features the strength of steel but the light weight of aluminum for easy handling. This is especially useful for construction and transportation in industries where weight is crucial. Henceforth, the strength of the m3 screw ensures that it can handle rigorous demands without compromising safety or performance. Thus, these properties prove an exceptional application in defense equipment, drone technology, and sporting goods.
Precision Engineering
The 7075 aluminum m3 screws are manufactured to a high level of tolerance due to the properties of the aluminum alloy. It means the screws maintain consistent dimensions, ensuring accuracy in applications that often rely on precision fasteners. This feature is critical in fields like aerospace and electronics where a small variation can lead to malfunction. Also, their tight threading and even shape promote secure connections and reduce wear in paired components. Henceforth, these screws are excellent for quality-centric industries due to reduced variability.
Easy to Install
Further, m3 screws are fabricated from 7075 aluminum and are lightweight and easy to handle, thus facilitating easy installation. The low density and high workability of 7075 make it easy to create screws with fine, precise threads that easily engage with mating parts. This property reduces the time and labor associated with installation in any project. In addition, it is highly advantageous in rapid assembly environments or manufacturing workshops. Overall, it offers a loose fit but quick installation across multiple applications.
Sustainable and Recyclable
The aluminum 7075 used in m3 screws is an environmentally friendly option since it is highly recyclable without losing any quality properties. Also, this supports sustainability practices in industries that aim to reduce their carbon footprint. Therefore, using 7075 aluminum in screws contributes to a circular economy. Further, as a non-toxic metal, it ensures safety within production lines and in its final product uses.
Following are commercial uses of Aluminium 7075 Screws M3.
Aerospace Industry
Aerospace industries prefer Aluminium 7075 due to its high strength, thus famed for its crucial role in constructing aircraft components such as wings, fuselage, and landing gear. 7075 aluminum provides an excellent strength-to-weight ratio, increasing performance without adding excessive weight. As airplane fasteners exhibit great strength, resistance to fatigue and corrosion, 7075 screws are integral to any aerospace assembly. By employing these screws, aerospace industries enhance safety, reliability, and efficiency in flying products.
Automotive Applications
The automotive industry widely employs 7075 aluminum screws as a lightweight, high-strength fastener in race cars, premium vehicles, and performance motorcycles. Ideally, these screws are useful in critical load-bearing environments such as chassis, suspension systems, and engine components. Often, the combination of lower weight and intense strength leads to improved fuel efficiency and performance. Also, their resistance to corrosion increases the longevity of fasteners in engine areas that might be susceptible to moisture and other irritants.
Marine Hardware
Often, marine hardware includes boat fixtures, sails, masts, and rigging, which are susceptible to corrosion due to water exposure. Ideal for this environment, 7075 aluminium screws have unmatched corrosion resistance coupled with high strength, making them perfect for fasteners in boats, yachts, and ships. In addition, these screws provide durable, reliable connections that assure safety and performance. Further, the yachting and boating industries use these screws to reduce maintenance and replace consistent fasteners.
Sports and Professional Equipment
The 7075 screw has secured an impressive reputation in the bicycle and other high-end sports equipment industry. Usually, these screws feature exceptional strength and low weight, minimizing gear weight without losing performance. Thus, mountain bikes, racing bicycles, and other sports gear use these screws in crucial load-bearing components, such as brake systems, frames, and wheels. This property enhances user handling and assurance and also boosts the functionality of all products.
Military and Defense
Known for its unparalleled strength, fatigue resistance, and corrosion 7075 aluminum is used in military and defense applications, including weapons, vehicles, and aircraft. 7075 screws are fasteners employed in critical defense equipment. Primarily, the combination of lightweight and robust build enhances mobility and durability in field conditions. Henceforth, these screws are integral to defense contractors who manufacture reliable equipment meeting rigorous military standards.
When choosing aluminium 7075 screws m3, buyers should consider the following points:
Use
Aluminium 7075 m3 screws are prominent in aerospace and automotive since the aluminium provides corrosion resistance and the 7075 alloy strength. Also, these sectors often require flat screws because of their ability to provide a flush fit, thus making them favourable in applications where surface smoothness is crucial. Other industries include marine hardware and military equipment, focusing on lightweight fasteners with superior resistance to harsh environmental conditions. Usually, these sectors appreciate the combination of strength and corrosion resistance offered by the unique aluminium alloy.
Head and Drive Style
Several head styles of 7075 screws include hex, slotted, and cap, and each offers unique installation and applications advantages. For instance, the hex head offers ease of torque application, while slotted heads are more straightforward and cost-efficient, though they have lower torque. Further, the cap head styles are ideal when a polished appearance is also desired alongside functionality. Therefore, selecting the right head style will depend on the specific needs of the project in terms of aesthetics, space availability, and installation accessibility.
Corrosion Resistance
One prominent feature of Aluminium 7075 m3 screws is their exceptional corrosion resistance property. Further, this makes it ideal for marine and outdoor applications where fasteners are prone to moisture and other corrosive elements exposure. In these environments, the aluminium alloy of 7075 provides a protective layer that ensures fasteners endure extreme conditions without deteriorating. Therefore, this property makes 7075 screws a reliable choice for industries that require durability and longevity in adverse environmental conditions.
Strength
Aluminium 7075 screws possess great strength, making them ideal for many commercial uses. Usually, these screws lightweight yet exceptionally sturdy due to the high strength-to-weight ratio of the 7075 alloy. Often, this property makes these screws particularly valuable in industries where performance is paramount, such as aerospace, automotive, and military applications. In addition, unlike other metals, which would, over time, bending or warping, these screws assure reliable and consistent integrity under rigorous stress, hence ensuring safety in critical applications.
Precision
Aluminium 7075 m3 screws are masterfully engineered with fine threading and consistent dimensions, making them an essential fastener in industries demanding a high degree of precision, especially in mechanical engineering. Moreover, these screws ensure secure connections in assemblies by maintaining tight tolerances. In addition, they enhance the overall performance of the product by reducing wear and tear on the components. Precisely these features are critical in aerospace, electronics, and medical devices where small deviations would result in significant impacts.
Yes, 7075 screws have high corrosion resistance, especially when used in marine environments as they are often anodized.
These screws have tensile strength ranging from 470 to 520 MP depending on the specific type of 7075 alloy.
While 6061 is more versatile, 7075 is better for high-strength applications because it has more zinc content.
The aerospace, auto, marine, and military industries use these screws due to their high strength and corrosion resistance.
