(1084 products available)
90-degree door openers, often referred to as door stops or holders, are devices that allow doors to open and stay at a 90-degree angle from the wall. They come in different types, each suitable for specific needs. Below are the types:
Wall Door Stop:
The wall stop is the most basic and widely used in the 90-degree door opener. It's installed on the wall, where it can absorb the impact of the door. It consists of a rubber or plastic stopper attached to a metal rod. When the door swings open, it hits the stopper and stops, preventing damage to the wall and door. Wall stops are inexpensive and easy to install but require wall space. They can also be less effective with heavy doors.
Floor Door Stop:
Like the wall stop, the floor stop is installed on the floor instead of the wall. It usually consists of a metal base with a rubber or plastic tip. When the door opens, it hits the floor stop and stops. Floor stops are suitable for areas with high foot traffic, but they may be tripped over if placed in the wrong spot.
Hinge Door Stop:
Hinge stops are installed on the door hinges. They work by limiting the range of motion of the door when opened. The hinge stop is a small metal piece attached to one of the hinges with a rubber or plastic tip that protrudes from the hinge assembly. Hinge stops are less visible and more secure, but they may not work for all hinge types.
Magnetic Door Stop:
Magnetic stops use magnets to hold the door open. One magnet is attached to the wall or floor, and the other is attached to the door. When the door swings open, the magnets will attract and hold the door in place. Magnetic stops are elegant and easy to use, but they may not work in areas with strong winds.
Push-Pull Door Hardware:
These are special hardware for doors that can be opened with a push or pull. They make it easy to use doors in public places, like schools and hospitals. The hardware is designed to make the door open 90 degrees with a push or pull. It's durable and can handle lots of people using it. Push-pull hardware is suitable for high-traffic areas but more expensive than regular door hardware.
Concealed Door Stop:
A concealed door stop is hidden when the door is closed. It's installed in the frame of the door and the wall. The stop is durable and made of metal. It will only appear when the door is fully open. Concealed stops look neat and don't take up space, but they are more complicated to install and not as strong as outside stops.
90-degree door openers are popular because they are easy to use. They help people to open and close doors without using a key. The following features and functions make the 90-degree door openers more useful.
Easy to Operate
90 degrees door openers are simple and easy to use. They can be used on different kinds of doors. The opener has a long handle that is easy to push down or pull up. People using the doors will find it easy to push down or pull up the handle to open or close the door.
Security
90 degrees door openers are very secure. They will keep the rooms safe. The reason is that they are difficult to pick or break. Rooms with 90-degree doors will be safe and secure.
Durability
90 degrees door openers are made with strong materials. The materials are resistant to wear and tear. The door openers will last for a long time without developing any faults.
Low Maintenance
Maintaining 90 degrees door openers is easy and simple. The openers don't require any special tools or skills. Owners can clean and lubricate the door openers. They will remain in good working condition for many years.
Versatility
These openers can be used for different types of doors. They can be installed on interior doors, exterior doors, patio doors, and French doors. They are suitable for residential and commercial buildings.
Accessibility
90-degree openers are suitable for persons with disabilities. The reason is that the handles are easy to operate. They can be used in wheelchair-accessible rooms.
Energy Efficiency
90-degree doors can help to reduce energy costs. The reason is that they seal tightly. The openers will prevent air from escaping or entering a room. These doors are suitable for energy-efficient buildings.
Noise Reduction
90 degrees door openers will reduce noise levels. The reason is that they seal tightly. The openers will block out noise from outside. They are suitable for offices and conference rooms.
When choosing a 90-degree door opener, there are several factors a business should consider to ensure they are getting the right product. Here are some of them:
Type of door and frame
The kind of door and frame will influence the selection of a magnetic door holder. For example, if the door is wooden, the magnetic door holder should be compatible with it. More importantly, the frame should be strong enough to accommodate the 90-degree door opener and ensure it functions well.
Quality and durability
It is important to select a quality and durable magnetic door holder. This will ensure the product lasts longer and withstands any door impact. Choosing a magnetic door holder made of quality material is essential. This is because quality door hardware will offer value to the customer.
Safety features
Safety features are important when selecting a 90-degree door opener. This is because safety sensors and emergency release features ensure the safety of the customers.
Installation requirements
It is important to consider the installation requirements of the 90-degree door opener. This is because some openers will require specific tools and skills for installation. Business owners should also consider the cost of installing each opener.
Price
Q1. What are the different kinds of 90 degrees door openers?
A1. There are many types of 90-degree door openers, including:
- Chain door opener: This door opener uses a chain to slide the door horizontally along a track. It is secure and can be opened at 90 degrees.
- Rail door opener: Rail 90-degree door openers work by sliding the door along tracks mounted on rails. They can be used for heavy doors and are secure.
- Telescopic door opener: This type of door opener extends and retracts to slide the door and is suitable for large openings, secure, and can be opened at 90 degrees.
- Folding door opener: This 90-degree door opener uses hinges to fold the doors and is suitable for limited spaces and secure.
- Pivot door opener: This door opener uses a pivot point to swing the door open at 90 degrees and is suitable for heavy doors and secure.
- Hydraulic door opener: This type of door opener uses hydraulic fluid to power a cylinder that opens the door and is suitable for heavy doors and secure.
- Electric door opener: These electric doors are opened using an electric motor and can be controlled remotely or with a key.
- Magnetic door opener: This type of door opener uses magnets to slide the door open at 90 degrees. It is suitable for lightweight doors and is easily installed.
- Gear and pinion door opener: This door opener uses gears and a pinion to slide the door open at 90 degrees and is suitable for heavy doors and secure.
- Belt-driven door opener: This type of door opener uses a belt to slide the door open at 90 degrees and is suitable for lightweight doors and easily installed.
- Cable door opener: This 90-degree door opener uses a cable to slide the door open at 90 degrees and is suitable for lightweight doors and easily installed.
- Gear-driven door opener: This type of door opener uses a gear system to slide the door open at 90 degrees and is suitable for heavy doors and secure.
All these kinds of 90-degree door openers will work well on a 90-degree door.
Q2. Can a 90-degree door open be used for doors that swing inwards?
A2. Yes, 90-degree door openers can be used for doors that swing inwards. The direction in which a door opens does not affect the suitability of a 90-degree door opener.