All categories
Featured selections
Trade Assurance
Buyer Central
Help Center
Get the app
Become a supplier
(1145 products available)
A 3s 2200mAh battery refers to a lithium polymer (LiPo) battery configuration commonly used in RC (Radio Control) hobbyist drones and quadcopters, model airplanes and helicopters, some portable electronics, and even small electric vehicles. Here’s how that breaks down:
Securities (3s) (Three cells in series configuration)
The designation “3s” means that three lithium polymer cells are connected in series. Each LiPo cell has an average nominal voltage of around 3.7V. By connecting three cells in series, the total voltage is approximately 11.1V (3 x 3.7V).
2200mAh (That is the capacity of the battery)
The “2200mAh” part means that the battery has a capacity of 2200 milliamp-hours. This provides an understanding of how much charge it can hold. More significantly, the “mAh” signifies the life of the time in which the battery can be empty at a given current consumption before dropping to a level where it cannot be freely discharged. Typical fast drainage currents used by lithium batteries in such applications are Ampere/hour or a fraction of Amp/hour. Always use the battery for charging purposes, as well as for correct storage and for understanding the safety precautions to prevent accidents from occurring. Considering their relatively moderate capacity and voltage configuration, 3S 2200mAh batteries are popular choices for small to medium-sized remote-controlled models needing lightweight power sources.
Because of their voltage, balance, and capacity, all these features make <strong>3s 2200mAh batteries</strong> suitable for use in a variety of industries.
Commercial drones
Drones are unmanned aerial vehicles that are used for aerial activities such as surveying, mapping, and monitoring. Constructing and agricultural sectors widely use lithium batteries to drive small police drones in an area that requires a portable energy source.
Remote control vehicles
3S 2200mAh batteries are extensively used in RC cars, boats, and airplanes. These batteries provide the desired combination of power and duration, enabling RC vehicles to travel long distances without having the batteries run out of charge.
Aerial photography
It is common practice in aerial photography and videography, especially with drones. Droned <strong>3s LiPo batteries</strong> supplies stabilized and continuous energy required to keep cameras and gimbals functioning over lengthy shooting sessions.
Electric Vehicle
Portable electronics
Although not as common as RC models and drones, some portable electronic devices such as handheld fans or gaming devices do use 3S 2200mAh batteries. These devices leverage the battery's compact size and power output.
Technical specifications
A 3s 2200mAh battery comprises three lithium polymer cells connected in a series. Hence, <strong>3s LiPo batteries<strong> are usually made of lightweight materials, metals like aluminum foil, and plastic films that lock the cells, making them compact, rigid, and durable. Because it has three cells wired in series, its nominal voltage is approximately 11.1 volts. That is a hefty voltage as far a LiPo battery is concerned.
The capacity of the battery is 2200 milliamp hours (mAh), indicating how much charge the battery is capable of storing. This is a measure of how much current the battery can supply. Based on lithium-polymer battery cell chemistry, the maximum charging rate is C5- capped. Beyond this, charging may physically damage the battery.
Key Features
Some features of 3s 2200mAh are:
How to install the 3s 2200mAh battery
Various devices can draw power from this energy source. To some extent, the installation method largely depends on the type of device the battery is plugged into. For example, in RC vehicles and drones, they form part of a compartment that houses and secures the battery using Velcro straps, elastic rubber bands, or a sliding hatch or tray mechanism. In area electric vehicles and some portables, the battery is installed into a bay or compartment that can be either fixed or designed to be replaceable.
As always, it is crucial that the battery be connected using its correct type of connector to the device it is powering, with the appropriate wire color coded. This means that red wires go to positive and black wires go to negative. All safety measures relating to batteries warrant that users only fix or replace batteries in spaces that have been designed to enable easy battery access when the battery is not connected and during the cool-down period after use.
Using the 3s 2200mAh battery
The main use of 3s 2200mAh batteries revolves around powering remote control products such as cars, boats, and quadcopters, as well as electric fans and portable gaming devices.
In the case of remote control quadcopters and other aircraft, these batteries provide the voltage and current required to keep the motors, electronics, hydration water pump system, and communication and navigation equipment running for reasonable and practical flying intervals without being too heavy.
3S 2200mAh lipo batteries are powerful enough to drive the larger remote control cars, trucks, and boats, although some smaller models can use smaller batteries. These are often installed into the vehicle dynamics to lower the center of mass and make handling stable.
Maintenance and care of the 3s 2200mAh battery
Proper maintenance of 3s 2200mAh batteries increases their effectiveness and helps them last longer. These practices are effective in preserving their structure and making them last for many more use cycles before they have to be replaced.
A few military maintenance practices of this battery include:
Store the battery in a low state of charge (around 3.8V per cell). Don't store it fully charged or emptied. Always keep it in a cool, dry place. High temperatures can cause explosion, and humidity can easily degrade battery.
Even though it's not very common, users should frequently inspect the battery for evidence of physical damage, punctures, or swelling, which could cause the device to explode.
Check battery connectors for signs of corrosion or damage and do a clean repair. Avoid the use of metal in any form near or on the battery, as it can short-circuit the battery, leading to serious accidents.
Choosing the right battery means there is an important factor in the performance and longevity of remote control devices, drones, electronic portable devices, and small electric vehicles. Hence, businesses consider sourcing these batteries adequately to meet customer demands. The first step in making the right choice and purchase decision involves thoroughly evaluating the following factors:
Battery quality
When it comes to materials and craftsmanship, both companies and end-users seek the same quality. This is important because a quality battery means that it has a maximum capacity to store energy, can deliver power safely consistently over many cycles, does not overheat, and has no physical degradation.
Substandard quality batteries may explode or cause fire hazards, putting the devices they power in jeopardy. Companies tend to look for reputable brands or manufacturers with long-standing records ready and willing to offer warranties on their products because this reflects quality.
Compatibility
Companies ensure that the batteries sourced are compatible with target devices. It includes considering parameters like voltage, current ratings, physical dimensions, and connector types to ensure proper installation with no problems. To reduce the number of different battery types they must stock, businesses may choose bulk 3S 2200mAh batteries and for a range of compatible products like remote control vehicles, drones, and portable electronics.
Price and availability
Reasonable prices go hand in hand with supply. It is only logical and practical that there should be some price level correlation with battery quality and sustainability the manufacturer is capable of. With all that in mind, companies consider purchasing in bulk because it attracts discounts. They also liaise with suppliers to make sure they can meet up with repeat sales as well as deal with any hiccups with supply that can bring about stock-out.
Lead times
Lengthy lead times can negatively affect the ability of a business to meet demand within the required time frame. To be precise in relation to lead times, companies strive to maintain proper inventory levels and establish relationships with suppliers to reduce lead times.
A1: Not all remote control vehicles are designed to work with a 3s 2200mAh battery. Although it delivers much voltage and power, it is always essential to check the vehicle's handbook regarding requirements concerning battery size, voltage, and connector type.
A2: Lithium polymer batteries can be recharged hundreds of times – typically around 300-500 cycles, though possibly many more under ideal circumstances.
A3: A 3s 2200mAh battery should be kept in a cool, dry place and safely enclosed in a fireproof container or Lipo bag. It should be stored at a “storage” charge level of about 3.8 volts per cell (approx. 11.4V for a 3s battery).
A4: Yes, to prolong the life of a 3s 2200mAh battery, avoid overcharging, overheating, and deep discharging. Proper storage and handling also contribute to battery longevity.
A5: Yes. Overcharging can cause swelling, heat generation, and even risk of explosion. Always use a balanced charger to prevent overcharging individual cells.
A6: Swelling in lithium polymer batteries indicates internal damage, often caused by overcharging, overheating, or physical damage. A swollen battery should be safely disposed of and not used.
