063450 li polymer battery

Types of 063450 li polymer batteries

Standard Li-Polymer battery

The 063450 Standard Li-Polymer battery is a rechargeable li polymer battery made of thin and flexible electrolyte. It has a capacity of 900 mAh, which helps to power small devices for a good amount of time.

High discharge rate Li-Polymer battery

This type of battery is designed to release large power quickly. It is great for devices that need li polymer battery 063450 to operate on high performance. Its excellent stability protects the battery from damage when used under extreme circumstances. Thus, it is preferable in demanding environments, like in executing drills or military combat.

Li-Polymer battery with built-in protection circuit

This battery features a thin circuit integrated into the battery to help stave off overcharging, overheating, and short-circuiting. It is designed to add safety, especially to things like smartphones and tablets that need Continue to be extra light. Even though it went thicker, the battery's safety improved a lot when it became thicker.

Waterproof Li-Polymer battery

The 063450 Li-Polymer batteries are sealed in a way that protects them from water and wet conditions. These batteries are meant to do well in electronics that may come in contact with liquid or endure dampness, like outdoor or adventure equipment. The water sealing does not affect the thin design, making it possible for the battery to stay sleek and light.

Rapid-charging Li-Polymer battery

These batteries charge up fast and have advanced battery technology. These batteries are preferred where a fast charge is of the utmost importance. The fine thing about these batteries is that they can charge in a very small period, with no more than 15 to 30 minutes required for a full charge. Even though it went sleek, convenient, and fast, the battery charges quickly but still maintains a good amount of energy and safety.

Industrial applications of 063450 li polymer battery

Consumer Electronics

The 063450 Li-Polymer battery is widely used in such electronics as smartphones, tablets, and wearables. Because of its compact size and versatility, this battery fits perfectly inside sleek designs while delivering efficient power for high performance. Its lightweight nature also adds to the portability of these devices, making it a favorite choice in consumer electronics.

Medical Devices

In medical equipment, reliability and safety are of utmost necessity. 063450 Li-Polymer batteries are used in portable medical equipment like ultrasound machines and patient monitors. The battery allows medical practitioners to use equipment freely without the constraint of wires while maintaining a steady and dependable power supply, thus boosting efficiency and enabling mobility in patient care.

Remote Monitoring Systems

Many industrial and environmental monitoring systems use 063450 Li-Polymer batteries for power. These devices frequently function in hard-to-reach areas and require a reliable power source for sustained operation. The batteries give a dependable energy vector for remote sensors, ensuring they continue to function for long periods. This makes them ideal for continuing monitoring in areas like construction sites, oil fields, and ecological research zones.

Military and Defense Equipment

The flexibility and durability of the 063450 Li-Polymer battery make it ideal for use in defence and military applications. They are used in tactical devices such as communication radios, body sensors, and surveillance drones. The batteries can withstand harsh conditions while providing a lightweight energy source for critical equipment in the field.

Electric Vehicles (EVs)

The 063450 Li-Polymer battery is mostly used in EVs and acts as a secondary battery. These batteries are great for power recovery and ensure the vehicle has a supplementary battery. Given their light in weight, the batteries do not add much to the general weight of the vehicle, helping conserve more energy and aerodynamics.

Product specifications and features of 063450 li polymer battery

Technical specifications/key features

• It has a battery capacity of 900 mAh, capable of powering small devices for an extended period.
• The 063450 Li-Polymer battery has a voltage rating of 3.7 V, which helps to provide steady and efficient power to electronics.
• This battery is 63 mm long, 45 mm wide, and 4.5 mm thick. It is small enough to fit into compact devices and lightweight to carry, measuring only 0.011 kg.
• The battery's design uses lithium polymer technology, allowing it to be slim and flexible. It can fit well into devices with limited space but still demands good energy.
• The battery is encased in a sturdy polymer exterior that protects it from physical damage and improves its lifespan mainly by preventing punctures.
• The Li-Polymer battery supports a temperature range of about -20 to +60 degrees Celsius, making it functional in extreme weather.
• The rechargeable nature of this battery can be recast up to 500 times, making it a cost-effective energy solution for electronics.

How to replace

• The first step in replacing a 063450 battery is to gather all the required items: a new battery, tools (like a screwdriver or a prying tool), and possibly adhesive or tape to secure the new battery.
• Next, the device containing the battery should be switched off when handling electronic devices. It helps avoid data corruption and damage to internal components.
• After that, the external casing of the device should be opened carefully to reveal the internal components. This step varies in different devices because some of them need screws to be removed, whereas, in others, a heating or cooling technique should be applied to pry the casing.
• Once the casing is removed, the battery should be located inside. It is carefully disconnected from anything it is connected to. In some devices, the battery should be removed from the device to disconnect it.
• The old battery was removed, and the new 063450 Li-Polymer battery was introduced. The new battery was connected to the device.
• Now, it's time to secure the battery back in place. In some cases, the battery is secured using adhesive or tape.
• Finally, the device's external casing was closed up again. All the screws were fixed where necessary, and the device was switched on to confirm that it was working properly.

Maintenance and repair

To take good care of the 063450 Li-Polymer battery and enable it to last longer, people should try not to charge the battery too much or too little. Ideally, they should keep it between 20 and 80 percent. Exposing the battery to extreme temperatures is harmful; it should be protected from very hot or cold environments.

When not in use, the battery should be stored in a cool, dry area to ensure it maintains its effectiveness over time. Finally, the battery should be checked physically every now and then for hazards like swelling, leakage, or corrosion. If anything of such is discovered, the battery should not be used at all because using it may even be dangerous.

Avoid replacing the battery with something that is not genuine or compatible, as this may lead to battery malfunction or, even worse, danger. Fulfilling repairs on the battery with DIY methods can be risky and dangerous if the equipment or components are not handled properly. Seeking professional help is the best answer when it comes to fixing problems with batteries. Patching up or trying to fix a broken battery can likewise be very dangerous.

Buyer Guide

Things to consider when buying a 063450 li polymer battery

When purchasing a 063450 Li polymer battery, people should consider the device the battery will power; this determines if the battery is compatible with the space needed and if it has the proper connections. Customers should consider the battery's capacity and recharge rate; batteries of higher capacity provide power for a longer time. They should also check the brand's reputation and ensure verified reviews support the product. It is advisable to buy from honest vendors who provide a warranty or guarantee, as this attests to the authenticity of the product. Also, customers should pay attention to the manufacturing date and ensure they do not select an old battery because it can lose efficiency over time. Lastly, they should select a battery based on the weather where they stay and how it will function properly under environmental conditions.

How to choose the 063450 li polymer battery

The 063450 Li-Polymer battery can be chosen based on some essential factors. First, there should be a consideration of the usage application. Based on this, determine whether an extended battery or a rapid charge variant is preferred. Battery capacity should be looked into, and people should buy a higher-capacity battery for longer usage times. Battery quality and brand reputation are important: look for manufacturers who use quality materials. Customers should make sure that the battery complies with safety specifications and contains things like overcharge protection. Another important thing is to read reviews and feedback from other buyers to see whether the battery meets performance and reliability expectations. People shouldn't forget to compare costs among trusted vendors to get the one that is worth it without going overboard.

Q&A

Q1: Will the 063450 Li polymer battery be replaced by regular lithium-ion batteries?

A1: It's not really a problem that they can't do, but it's not as good as lipo batteries. Compared to li-ion batteries, Li-Polymer batteries are lighter and have more room in their structure. But lithium-ion batteries have better density when it comes to energy. So, even though they can replace them, it will not carry the same efficiency as them.

Q2: Are the 063450 lithium polymer batteries safe for long-distance travels like planes?

A2: Most airlines will accept these batteries based on specific power ratings. As long as the watt-hours do not exceed 100, it will be fine to fly. It has to be carried out as cabin luggage and not in a hold. However, travelers need to check the regulations on the airline they are flying with, as policies shift.

Q3: What's so special about lithium polymer batteries that lithium batteries don't have in general?

A3: The solace that these batteries are designed with more accommodation and flexibility is what makes Li-Poly batteries different from others. These batteries can be molded into slim shapes, making them ideal for collecting electronic gadgets. The materials used in this battery allow for more resilience in different life aspects. All these features allow this battery to be used in a number of electronic devices.

Q4: Can someone use the Li Polymer 063450 battery in an electric vehicle?

A4: Yes, because of the versatility and compactness of these batteries, they can be used in small electric vehicles, bicycles, and scooters. In bigger electric vehicles like cars and buses, these batteries are not really used because there are bigger forms of batteries that help power those vehicles.

Q5: What are the best ways to ensure a long lifespan for these 063450 lithium polymer batteries?

A5: To prolong the life of these batteries, it is recommended not to let them drop lower than 20% in power and to avoid charging them up past 100%. Keep the battery away from extreme levels of heat or cold. Storing the battery in a cool, dry place helps maintain its efficiency and effectiveness over time.