Bộ dầu có thể khả năng ra 200 để làm đồ Nissan Navara D40 2.5 Ltr T D từ 2006

FOB Tham Khảo Giá:Nhận giá mới nhất
US $0.01-0.05 / Piece | 1 Piece / Pieces (Min. Thứ Tự)
Khả Năng cung cấp:
10000 Piece / Pieces trên Ngày
tổng quan
Chi Tiết ngắn Gọn
Nơi xuất xứ:
Zhejiang, China (Mainland)
Nhãn hiệu:
khả năng ra 200
chứng nhận:
cho phù hợp với:
tất cả các loại ô tô/Xe Tải
chất liệu:
OEM No.::
Packaging & Delivery
Thông tin đóng gói
Sản phẩm sẽ gói theo cầu khách hàng ( nylon túi/thùng / pallet )
Thời gian Cung cấp
Vòng bảy ngày trên basis nhận thanh toán đầy đủ


1. Provent 200 Oil Catch Can Kit to Suit Nissan Navara D40 2.5 Ltr T/D from 2006
2. can supply detail drawing information


The ProVent 200 series catch can is the newest innovation for crankcase ventilation. It is specifically designed to accommodate the latest generation of turbo-charged engines. Its compact and robust design allows flexible installation locations on the engine or in the engine compartment.

It has the following advantages over other solutions:

  • Highly efficient oil separation as a closed as well as an open system providing ideal protection for the turbocharger and other components installed downstream
  • Low pressure loss
  • Less motor oil consumption in comparison to less efficient separators or conventional open systems
  • No electrical energy required
  • Maintenance friendly - fittings are not removed during element maintenance, a cap at the top allows full access inside w/o disconnecting a single hose.


  • Efficient filter media to separate air and oil vapor, as well as using a "vortex" strategy to fling heavier oil and water particles outward to the sides of the can
  • Filter is easily cleanable and servicable w/o disconnecting any hoses.
  • 1" nipples in and out, and a 1/2" drain nipple which allows clean oil to drain back to the sump.
  • Pressure vent in cap to prevent over-pressure in the crank case
  • Vacuum limiting valve in lower nipple to regulate vacuum in the can
  • Highly adjustable mounting bracket can be swivelled 180 degrees around can
  • Strong and light plastic construction
  • Top 1" Nipple should be connected to crankcase, lower port can be vented to atmosphere or the intake such as Turbo or Throttlebody inlet

Height: 221mm OD/Width Max: 109mm OD/Width Min: 13mm ID/Depth Max: 10mm ID/Depth Min: 0mm


Typically in stock, price each with all parts shown.